Experimental and numerical investigation of the springback behaviour of CP800 sheet after the V-bending process

Basit Öğe Kaydı
dc.authoridTasdemir, Vedat/0000-0002-2375-9525
dc.contributor.authorSen, Nuri
dc.contributor.authorTasdemir, Vedat
dc.date.accessioned2021-12-01T18:47:39Z
dc.date.available2021-12-01T18:47:39Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractSpringback plays a key role in the geometrical and dimensional integrity of the product obtained in metal forming. This study investigated the formability of high-strength complex phase CP800 sheet under V-bending at room temperature. The experiments were carried out on 2.5-mm-thick material using parameters of four different bending angles, three different punch radii and two different holding times. The effects of selected parameters on springback were investigated both experimentally and via finite element analysis (FEA). As a result of the study, it was determined that the amount of springback decreased as the die angle (alpha) increased and increased as the punch radius (r) increased, and that the effect of the holding time remained limited. In addition, the damage was observed in the bending samples obtained under experimental conditions of alpha = 60 degrees and r = 2 mm. The experimental and simulation findings showed that the measured angles (beta) were in good agreement (>95%).en_US
dc.identifier.doi10.1080/03019233.2021.1872466
dc.identifier.endpage818en_US
dc.identifier.issn0301-9233
dc.identifier.issn1743-2812
dc.identifier.issue7en_US
dc.identifier.scopus2-s2.0-85099768055en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage811en_US
dc.identifier.urihttps://doi.org/10.1080/03019233.2021.1872466
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10339
dc.identifier.volume48en_US
dc.identifier.wosWOS:000611607500001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Ltden_US
dc.relation.ispartofIronmaking & Steelmakingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCP800 sheeten_US
dc.subjectV-bendingen_US
dc.subjectspringbacken_US
dc.subjectfinite element analysisen_US
dc.subjectsheet metal formingen_US
dc.subjectHSSen_US
dc.subjectbendingen_US
dc.subjectexperimental analysisen_US
dc.titleExperimental and numerical investigation of the springback behaviour of CP800 sheet after the V-bending processen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
10339.pdf
Boyut:
1.34 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu