Effect of Different Conical Punch Angle Geometries and the Initial Hole Diameters on the Hole Expansion Ratio of DP steels
Yükleniyor...
Dosyalar
Tarih
2022
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Society of Automotive Engineers Turkey
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In the recent decade, advanced high strength steels (AHSS) have gained a great popularity in the automotive manufacturing industries due to their high strength to weight ratio, which significantly improves the safely of the manufactured automobiles while reducing the weight and thus, enabling to improve the fuel efficiency. However, it is known that some types of AHSSs, especially DP steels, are highly susceptible to edge cracking behaviour during the forming operations. Edge cracking behaviour is generally investigated with a 600 conical punch as suggested by the ISO 16630 standard. However, in mis study, to observe the behaviour of edge cracking ability of DP steels under different conical punch angles for different initial hole diameters, hole expansion tests have been performed with conical punches with three different angles (300 ,600 and 900) for three different initial hole diameters (14, 16 and 18 mm). The results have shown that the hole expansion ratio (HER) does not differ considerably with the variation of the conical punch angle and the initial hole diameter due to low fracture strain of DP steels observed after hole expansion tests. The major factor for the edge stretching ability of DP steels have been observed to be microstructure rather than geometrical factors such as conical punch angles. © 2023. Multidisciplinary Science Journal. All rights reserved.
Açıklama
Anahtar Kelimeler
Advanced high strength steels, AHSS, DP steels, Hole expansion ratio
Kaynak
International Journal of Automotive Science and Technology
WoS Q Değeri
Scopus Q Değeri
N/A
Cilt
6
Sayı
3
