Cure cycle optimization of infrared cured composites using Taguchi method

Basit Öğe Kaydı
dc.authoridKILINÇEL, Mert/0000-0001-7057-4390en_US
dc.authorscopusid57203846184en_US
dc.authorscopusid6603118192en_US
dc.authorscopusid57214803034en_US
dc.authorscopusid8413639900en_US
dc.authorwosidKILINÇEL, Mert/KFC-0472-2024en_US
dc.contributor.authorAlpay, Yakup O.
dc.contributor.authorUygur, Ilyas
dc.contributor.authorKilincel, Mert
dc.contributor.authorSamtas, Gurcan
dc.date.accessioned2024-08-23T16:07:19Z
dc.date.available2024-08-23T16:07:19Z
dc.date.issued2023en_US
dc.departmentDüzce Üniversitesien_US
dc.description.abstractKnowing that cure cycle has a significant effect on the mechanical properties of the composite materials, determining the effects of cure cycle parameters - such as heating rate, maximum temperature, and dwell time, has gain importance. This study addresses the optimum cure cycle of an infrared cured carbon fiber pre-preg material. An infrared oven equipped with 1 kW halogen infrared heating unit and vacuum system was used. Different cure cycles determined by means of Taguchi experiment design approach and a cure cycle was found maximizing the tensile strength of the material. Results showed that infrared curing is a strong alternative to the autoclave despite its shortcomings regarding the product geometry. The optimized cure cycle showed 23% increase in the tensile strength comparing the tested cure cycle which is resulted with the minimum tensile strength. Besides, comparing the specimens cured with the optimum cure cycle, the infrared cured specimens showed slightly higher tensile strength than the autoclave cured counterparts. According to Taguchi optimization, optimum values for maximum tensile strength were found as 10 degrees C/min, 130 degrees C for heating rate and 60 min for plateau time. According to the analysis of variance, the most effective parameter affecting the tensile strength was the heating rate.en_US
dc.description.sponsorshipDuzce University [2017.06.05.603]en_US
dc.description.sponsorshipDuzce University, Grant/Award Number:2017.06.05.603en_US
dc.identifier.doi10.1002/app.53922
dc.identifier.issn0021-8995
dc.identifier.issn1097-4628
dc.identifier.issue22en_US
dc.identifier.scopus2-s2.0-85152674208en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1002/app.53922
dc.identifier.urihttps://hdl.handle.net/20.500.12684/14588
dc.identifier.volume140en_US
dc.identifier.wosWOS:000968903200001en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWileyen_US
dc.relation.ispartofJournal of Applied Polymer Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectcure cycle optimizationen_US
dc.subjectinfrared curingen_US
dc.subjectout of autoclave composite curingen_US
dc.subjectTaguchi approachen_US
dc.subjectInterlaminar Shear-Strengthen_US
dc.subjectMultiobjective Optimizationen_US
dc.subjectMechanical-Propertiesen_US
dc.subjectProcess Parametersen_US
dc.subjectCuring Processen_US
dc.subjectCarbonen_US
dc.subjectBehavioren_US
dc.titleCure cycle optimization of infrared cured composites using Taguchi methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu