Optimization of diode laser cutting parameters for wood veneers using artificial neural networks

dc.contributor.authorIlce, Abdullah Cemil
dc.contributor.authorCiftci, Seymen
dc.date.accessioned2026-07-01T11:39:50Z
dc.date.available2026-07-01T11:39:50Z
dc.date.issued2025
dc.departmentDüzce Üniversitesi
dc.description.abstractIn this study, an artificial neural network (ANN) model was developed to estimate the heat-affected zone (HAZ) width in laser cutting of walnut (Juglans nigra L.) and acer (Acer pseudoplatanus L.) veneers using a diode laser. The model used input parameters such as material type, laser power, cutting speed, and angle. It achieved high prediction accuracy, with MAPE values of 4.44% (training) and 7.01% (test), and RMSE values of 0.60% and 0.70%, respectively. A strong correlation (R > 91%) and high R-2 values (> 94%) between predicted and observed HAZ widths confirmed the model's reliability. Visual analyses supported these results. The HAZ width was influenced by cutting speed and angle, especially when the material type was held constant. Generally, increasing the cutting speed reduced the HAZ width. Similarly, raising the laser power (1.67 W -> 6.66 W) also led to narrowing of the HAZ. Walnut veneer, being dark-colored, extractive-rich, and having large tracheal structure, exhibited wider HAZ due to higher heat absorption and pyrolysis. In conclusion, the ANN model effectively reflects parameter effects on the HAZ in laser cutting and serves as a reliable decision-support tool, offering both time and cost efficiency.
dc.identifier.doi10.1080/17480272.2025.2586259
dc.identifier.issn1748-0272
dc.identifier.issn1748-0280
dc.identifier.scopus2-s2.0-105021950409
dc.identifier.scopusqualityQ2
dc.identifier.urihttps://doi.org/10.1080/17480272.2025.2586259
dc.identifier.urihttps://hdl.handle.net/20.500.12684/23493
dc.identifier.wosWOS:001616351500001
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherTaylor & Francis Ltd
dc.relation.ispartofWood Material Science & Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20260623
dc.subjectDiode Laser
dc.subjectArtificial Neural Network
dc.subjectLaser Cutting Parameters
dc.subjectWood Veneers Marquetry
dc.titleOptimization of diode laser cutting parameters for wood veneers using artificial neural networks
dc.typeArticle

Dosyalar