Non-destructive evaluation of beech and oak wood bent at different radii

Basit Öğe Kaydı
dc.contributor.authorBüyüksarı, Ümit
dc.contributor.authorAs, Nusret
dc.date.accessioned2020-04-30T23:19:39Z
dc.date.available2020-04-30T23:19:39Z
dc.date.issued2013
dc.departmentDÜ, Orman Fakültesi, Orman Mühendisliği Bölümüen_US
dc.descriptionAS, Nusret/0000-0002-5269-1574en_US
dc.descriptionWOS: 000316042600011en_US
dc.description.abstractThe aim of this study was to investigate the parallel and perpendicular velocity and transmission time of beech and oak wood bent at different radii. Two trees from each wood species, having straight trunks of approximately 40 cm in diameter, were selected, and two 4-m logs were cut from each tree. The prepared samples, except those from the control groups, were steamed, bent and set. The samples were bent at three different radii (300 mm, 200 mm and 100 mm) in the tangential direction. The density, parallel and perpendicular (radial and tangential) velocity and transmission times of the beech and oak wood were determined. The results of this study showed that the bent samples of beech and oak wood had higher density compared to the unbent groups. The density of both wood species increased with the decreasing bending radius. The highest velocity parallel to the fibers was measured on the convex surface, while the lowest was measured on the concave surface. The parallel and perpendicular velocity decreased as the bending radius decreased. (c) 2013 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.compositesb.2012.12.006en_US
dc.identifier.endpage110en_US
dc.identifier.issn1359-8368
dc.identifier.issn1879-1069
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage106en_US
dc.identifier.urihttps://doi.org/10.1016/j.compositesb.2012.12.006
dc.identifier.urihttps://hdl.handle.net/20.500.12684/3815
dc.identifier.volume48en_US
dc.identifier.wosWOS:000316042600011en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofComposites Part B-Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWooden_US
dc.subjectMechanical propertiesen_US
dc.subjectNon-destructive testingen_US
dc.titleNon-destructive evaluation of beech and oak wood bent at different radiien_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
3815.pdf
Boyut:
343.43 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu