Optimization of flank wear and surface quality in the turning of 1.2343 tool steel using carbide tools coated via different methods
dc.contributor.author | Ozbek, Nursel Altan | |
dc.date.accessioned | 2021-12-01T18:46:57Z | |
dc.date.available | 2021-12-01T18:46:57Z | |
dc.date.issued | 2021 | |
dc.department | [Belirlenecek] | en_US |
dc.description.abstract | This study evaluated the effects of cutting tool coating type and process parameters on flank wear and surface roughness in the turning of hardened 1.2343 hot work tool steel. Two different coated tungsten carbide cutting tools (CVD TiCN/Al2O3/TiN and PVD TiAlN/TiN), three different cutting speeds and three different feedrates were used for the experimental tests. Turning tests were designed based on the Taguchi method (L18). Experimental results demonstrated that the PVD TiAlN/TiN tool performed better under all cutting conditions. Analysis of variance results determined the feedrate, with an impact ratio of 82.61%, to be the parameter with the most impact on surface roughness, while flank wear was most affected by the cutting tool, with 89.12%. | en_US |
dc.description.sponsorship | Duzce University Research FundDuzce University [BAP-2016.22.01.435] | en_US |
dc.description.sponsorship | The author appreciate the financial support from the Duzce University Research Fund (BAP-2016.22.01.435). | en_US |
dc.identifier.doi | 10.1088/2051-672X/abfd06 | |
dc.identifier.issn | 2051-672X | |
dc.identifier.issue | 2 | en_US |
dc.identifier.scopus | 2-s2.0-85107508004 | en_US |
dc.identifier.scopusquality | Q2 | en_US |
dc.identifier.uri | https://doi.org/10.1088/2051-672X/abfd06 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12684/10071 | |
dc.identifier.volume | 9 | en_US |
dc.identifier.wos | WOS:000655279700001 | en_US |
dc.identifier.wosquality | Q3 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.institutionauthor | Ozbek, Nursel Altan | |
dc.language.iso | en | en_US |
dc.publisher | Iop Publishing Ltd | en_US |
dc.relation.ispartof | Surface Topography-Metrology And Properties | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | 1 | en_US |
dc.subject | 2343 steel | en_US |
dc.subject | CVD | en_US |
dc.subject | PVD coating | en_US |
dc.subject | surface roughness | en_US |
dc.subject | flank wear | en_US |
dc.subject | optimization | en_US |
dc.subject | Cutting Parameters | en_US |
dc.subject | Roughness | en_US |
dc.subject | Pvd | en_US |
dc.subject | Cvd | en_US |
dc.subject | Performance | en_US |
dc.subject | Coatings | en_US |
dc.subject | Model | en_US |
dc.title | Optimization of flank wear and surface quality in the turning of 1.2343 tool steel using carbide tools coated via different methods | en_US |
dc.type | Article | en_US |