Effects of fine blanking process on cutting surfaces of high-strength DP600 and DP800 sheets

Basit Öğe Kaydı
dc.authoridTasdemir, Vedat/0000-0002-2375-9525
dc.contributor.authorSen, Nuri
dc.contributor.authorHelimergin, Fatih
dc.contributor.authorTasdemir, Vedat
dc.date.accessioned2021-12-01T18:49:06Z
dc.date.available2021-12-01T18:49:06Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractIn this study, both blanking and fine blanking processes were performed using 1mm thick DP600 and DP800 sheet materials. The cutting surfaces of the materials were examined using scanning electron microscopy (SEM). The SEM examinations showed that the extent of the fracture zone in the blanking method was much greater than in the fine blanking method, whereas the extent of the shear zone in the fine blanking method was much greater than in the blanking method. In addition, in the fine blanking experiment, it was observed that the crescent and star pieces were nearly all sheared and detached from the test material, whereas with the blanking method, the crescent and star pieces were broken off from the test material. In the blanking, more than half of the cutting surface (0.6t) formed a fracture zone, while in the fine blanking no fracture zone and a shear zone of 0.9t was seen.en_US
dc.description.sponsorshipDuzce University Research FundDuzce University [2019.06.05.901]en_US
dc.description.sponsorshipThe authors gratefully acknowledge the financial support of the Duzce University Research Fund for this work (Project no: 2019.06.05.901).en_US
dc.identifier.doi10.1080/03019233.2021.1915647
dc.identifier.endpage1088en_US
dc.identifier.issn0301-9233
dc.identifier.issn1743-2812
dc.identifier.issue9en_US
dc.identifier.scopus2-s2.0-85104836985en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1083en_US
dc.identifier.urihttps://doi.org/10.1080/03019233.2021.1915647
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10663
dc.identifier.volume48en_US
dc.identifier.wosWOS:000643799300001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Ltden_US
dc.relation.ispartofIronmaking & Steelmakingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFine blankingen_US
dc.subjectDP600en_US
dc.subjectDP800en_US
dc.titleEffects of fine blanking process on cutting surfaces of high-strength DP600 and DP800 sheetsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
10663.pdf
Boyut:
1.02 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu