Optimization of Surface Roughness in Drilling Medium-Density Fiberboard with a Parallel Robot

Basit Öğe Kaydı
dc.authoridKARA, Fuat/0000-0002-3811-3081
dc.contributor.authorAyyildiz, Elmas Askar
dc.contributor.authorAyyildiz, Mustafa
dc.contributor.authorKara, Fuat
dc.date.accessioned2021-12-01T18:47:31Z
dc.date.available2021-12-01T18:47:31Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractThis study focuses on the examination of the effect of cutting parameters on surface roughness when drilling medium-density fiberboard (MDF) with a parallel robot. Taguchi technique was applied to find the optimum drilling parameters and, later, the drilling processing. Experimental layout was established using the Taguchi L-18 orthogonal array, and experimental data were examined via a statistical analysis of variance (ANOVA). Experimental results were performed by multiple regression analysis (linear and quadratic). Correlation coefficient (R-2) was found 99.46% for surface roughness with the quadratic regression model. By the Taguchi analysis, the optimum values for the surface roughness were found to be a point angle of 118 degrees, a cutting speed of 47.1 m/min, and a feed rate of 0.01 mm/rev. The optimization outcomes presented that the Taguchi technique had been successfully performed to decide the optimal surface roughness of the MDF in the drilling.en_US
dc.identifier.doi10.1155/2021/6658968
dc.identifier.issn1687-8434
dc.identifier.issn1687-8442
dc.identifier.scopus2-s2.0-85099925221en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1155/2021/6658968
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10298
dc.identifier.volume2021en_US
dc.identifier.wosWOS:000613069700002en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherHindawi Ltden_US
dc.relation.ispartofAdvances In Materials Science And Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectTaguchi Optimizationen_US
dc.subjectMachining Parametersen_US
dc.subjectPredictionen_US
dc.subjectMdfen_US
dc.titleOptimization of Surface Roughness in Drilling Medium-Density Fiberboard with a Parallel Roboten_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
10298.pdf
Boyut:
2.17 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu