Mechanical and physical properties of medium density fiberboard panels laminated with thermally compressed veneer

Basit Öğe Kaydı
dc.contributor.authorBüyüksarı, Ümit
dc.contributor.authorHızıroğlu, Salim
dc.contributor.authorAkkılıç, Hüseyin
dc.contributor.authorAyrılmış, Nadir
dc.date.accessioned2020-04-30T23:19:08Z
dc.date.available2020-04-30T23:19:08Z
dc.date.issued2012
dc.departmentDÜ, Orman Fakültesi, Orman Mühendisliği Bölümüen_US
dc.descriptionAyrilmis, Nadir/0000-0002-9991-4800en_US
dc.descriptionWOS: 000301158400002en_US
dc.description.abstractThe objective of study was to evaluate some of the physical and mechanical properties of medium density fiberboard (MOP) panels laminated with veneer sheets compressed at different levels of pressure and temperature. Rotary peeled veneer samples of European beech (Fagus orientalis Lipsky) were compressed at temperatures of 150 degrees C, 180 degrees C, and 200 degrees C using 4 MPa and 6 MPa pressure for 8 min. Commercially produced MDF samples also were laminated with such compressed veneer sheets. Both modulus of elasticity (MOE) and modulus of rupture (MOR) of the specimens increased with increasing pressure and press temperature. Bending characteristics of the samples tested parallel to the grain orientation resulted in significantly higher values than that perpendicular to the grain orientation for each manufacturing parameter. Thickness swelling of the samples also was influenced by increased pressure but variation in press temperature did not result in any influence on dimensional stability. The findings of this work provide potential to produce sandwich type panels with improved properties. Initial results found in this study could be used to manufacture laminated panels with a fixed rate of adhesive while controlling press parameters as a function of the magnitude of pressure and temperature. (C) 2011 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.compositesb.2011.11.040en_US
dc.identifier.endpage114en_US
dc.identifier.issn1359-8368
dc.identifier.issue2en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage110en_US
dc.identifier.urihttps://doi.org/10.1016/j.compositesb.2011.11.040
dc.identifier.urihttps://hdl.handle.net/20.500.12684/3663
dc.identifier.volume43en_US
dc.identifier.wosWOS:000301158400002en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofComposites Part B-Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWooden_US
dc.subjectLaminatesen_US
dc.subjectMechanical propertiesen_US
dc.subjectPhysical propertiesen_US
dc.titleMechanical and physical properties of medium density fiberboard panels laminated with thermally compressed veneeren_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
3663.pdf
Boyut:
357.49 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu