The effect of Ag, ZnO, and CuO nanoparticles on the properties of the compatibilized polyethylene/thermoplastic starch blend films

Basit Öğe Kaydı
dc.authoridAytac, Ayse/0000-0002-9566-7881
dc.authorwosidAytac, Ayse/V-4727-2017
dc.contributor.authorOzdemir, Elif
dc.contributor.authorUcar, Ikrime Orkan
dc.contributor.authorAkay, Ramiz Gultekin
dc.contributor.authorAytac, Ayse
dc.date.accessioned2021-12-01T18:47:45Z
dc.date.available2021-12-01T18:47:45Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractIn this study, the effects of Ag, ZnO, and CuO nanoparticles (NPs) on the mechanical, thermal, and biodegradability properties of the compatibilized polyethylene (PE)/thermoplastic starch (TPS) blends were investigated. Polyethylene-grafted maleic anhydride (PE-g-MA) was used as the compatibilizer. The compatibilized PE/TPS blends with different NPs were prepared by melt mixing method in a laboratory scale extruder and then pressurized in the press machine. The use of ZnO NP together with the compatibilizer in PE/TPS-based films significantly increased the tensile stress values. The use of different type NPs did not cause any significant change in the thermal stability of PE/TPS-based films. However, the effects of NPs were observed on the TPS degradation steps. The prepared films with different NPs showed an antibacterial activity between 60% and 70%. The highest crystallinity value was obtained in Ag NP containing films, among others. According to scanning electron microscopy analysis, better distribution was observed for ZnO and Ag NPs than CuO NP. In general, it can be said that the addition of NPs to PE/TPS-based blends significantly reduces the partial biodegradability of the resulting films.en_US
dc.description.sponsorshipKocaeli UniversityKocaeli Universityen_US
dc.description.sponsorshipKocaeli Universityen_US
dc.identifier.doi10.1002/vnl.21826
dc.identifier.endpage554en_US
dc.identifier.issn1083-5601
dc.identifier.issn1548-0585
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85104369151en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage543en_US
dc.identifier.urihttps://doi.org/10.1002/vnl.21826
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10367
dc.identifier.volume27en_US
dc.identifier.wosWOS:000640617800001en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWileyen_US
dc.relation.ispartofJournal Of Vinyl & Additive Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectcompatibilizeren_US
dc.subjectmetalen_US
dc.subjectmetal oxide nanoparticlesen_US
dc.subjectpolyethyleneen_US
dc.subjectthermoplastic starchen_US
dc.titleThe effect of Ag, ZnO, and CuO nanoparticles on the properties of the compatibilized polyethylene/thermoplastic starch blend filmsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
10367.pdf
Boyut:
2.81 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu