THE EFFECT OF CRYOGENIC TREATMENT ON THE PUNCH WEAR AND THE HOLE EDGE GEOMETRY

Basit Öğe Kaydı
dc.contributor.authorArslan, Yusuf
dc.date.accessioned2021-12-01T18:47:42Z
dc.date.available2021-12-01T18:47:42Z
dc.date.issued2020
dc.department[Belirlenecek]en_US
dc.description.abstractThe ball joint parts made of forged steel are quite important in the suspension system. The quality of production of ball joint parts is very important because of their role. Some basic defects can be found in the hole edge form. These defects affect the hole quality of ball joint parts. In this study, the effects of cryogenic processing on the wear of AISI D2 punches and the effects of punch wear on the hole edge geometry of hot forged AISI 1040 steel ball joint parts were investigated. The hole geometry changes are generally associated with punch wear and process parameters. For the purpose of investigation, piercing was carried out using an eccentric press with AISI D2 tool steel punches on 6.0 mm-thick ball joint pieces. The punches were traditionally heat treated. Some of the punches were cryogenic-treated at -145 degrees C in addition to the conventional heat treatment. Weight loss values were measured to assess the punch wear, and SEM and OM images were analysed. At the end of the industrial piercing process, it was found that the D2 tool steel punch wear decreased with cryogenic process applied and the size changes in the hole edge geometry of the punched 1040 hot forged steel parts turned out to be less marked.en_US
dc.description.sponsorshipTUBITAK/TEYDEBTurkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [1505]; University-Industry Cooperation Research Program [5150012]en_US
dc.description.sponsorshipThis study was supported by TUBITAK/TEYDEB 1505 University-Industry Cooperation Research Program under the scope of Project Number 5150012.en_US
dc.identifier.doi10.21278/TOF.44205
dc.identifier.endpage57en_US
dc.identifier.issn1333-1124
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85091945605en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage45en_US
dc.identifier.urihttps://doi.org/10.21278/TOF.44205
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10350
dc.identifier.volume44en_US
dc.identifier.wosWOS:000580444900006en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorArslan, Yusuf
dc.language.isoenen_US
dc.publisherUniv Zagreb Fac Mechanical Engineering & Naval Architectureen_US
dc.relation.ispartofTransactions Of Famenaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCryogenic treatmenten_US
dc.subjectball jointen_US
dc.subjectpunch wearen_US
dc.subjectedge geometryen_US
dc.subjectAISI D2en_US
dc.subjectAISI 1040en_US
dc.subjectMechanical-Propertiesen_US
dc.subjectBlanking Forceen_US
dc.subjectTool Steelen_US
dc.subjectMicrostructureen_US
dc.subjectResistanceen_US
dc.subjectBehavioren_US
dc.subjectClearanceen_US
dc.subjectPerformanceen_US
dc.subjectSimulationen_US
dc.subjectWorken_US
dc.titleTHE EFFECT OF CRYOGENIC TREATMENT ON THE PUNCH WEAR AND THE HOLE EDGE GEOMETRYen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
Ä°sim:
10350.pdf
Boyut:
1.71 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
Ä°ndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu