Design and Experimental Investigation of Pneumatic Movement Mechanism Supported by Mechanic Cam and Crank Shaft
Yükleniyor...
Dosyalar
Tarih
2015
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Assoc Information Communication Technology Education & Science
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The pressurized air is applied to many sectors required purity and velocity. One of these sectors is to use of air as impulsive force in the moving mechanisms. In this study, the movement mechanism prototype worked with compressed air was designed and produced forlight vehicle engine as motorbike and ATV (All-Terrain Vehicle). In developed mechanisms, pneumatic artificial muscles were used for a given movement of crankshaft. A cam system was also designed for synchronization pneumatic muscles. In this way, these muscles transmit the synchronous movement to crankshaft. At the end of the study, the developed mechanism was mounted on an ATV vehicle(110 cc/ Cubic Centimeter, engine displacement capacity) and its performance was tested using the four different weights (50, 75, 100 and 150 kg), three different pressures (4, 5 and 6 bar) and two different hoses (empty set 6 and empty set 8 mm). By considering experimental results and design criteria, power of the movement mechanism was obtained as 886 Watt. With this study, minimization of energy consumption for movement of passenger cars, and using clean and cheap energy as ATV which can be alternative for single or two passenger vehicles.
Açıklama
WOS: 000362664800003
Anahtar Kelimeler
Pneumatic artificial muscle, ATV air vehicle, compressed air, pneumatic mechanism
Kaynak
Tem Journal-Technology Education Management Informatics
WoS Q Değeri
N/A
Scopus Q Değeri
Cilt
4
Sayı
1
