Investigation of Surface Morphology of Drilled Cfrp Plates and Optimization of Cutting Parameters

Basit Öğe Kaydı
dc.contributor.authorErkan, Ömer
dc.contributor.authorSur, Gökhan
dc.contributor.authorNas, Engin
dc.date.accessioned2020-04-30T13:32:39Z
dc.date.available2020-04-30T13:32:39Z
dc.date.issued2020
dc.departmentDÜ, Teknoloji Fakültesi, Makine ve İmalat Mühendisliği Bölümüen_US
dc.description.abstractIn this study, the carbon fiber reinforced polymer (CFRP) composite material was drilled using different parameters (118° and 140° Point Angle, 30, 60 and 90m min-1 cutting speed and 0.06, 0.08 and 0.10mmrev-1 feed rate). Experimental parameters were designed according to full factorial design method and the results were analyzed using Taguchi L18 experimental design. The results of the study show that the lowest surface roughness values are 0.1958 and 0.1945?m with the cutting speed of 90 mmin-1 and feed rate of 0.06mrev-1 in the Point angles of 11° and 140°, respectively. When the results of Anova analysis were evaluated, parameters (feed speed, cutting speed and end point angle) according to the effect ratios on surface roughness were formed at the rates of 41.06%, 33.13% and 5.07%, respectively. The most suitable parameters according to S/N ratios were determined using A2B3C1 factors for the average surface roughness. © 2020 World Scientific Publishing Company.en_US
dc.identifier.doi10.1142/S0218625X19502093en_US
dc.identifier.issn0218625X
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://dx.doi.org/10.1142/S0218625X19502093
dc.identifier.urihttps://hdl.handle.net/20.500.12684/384
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWorld Scientific Publishing Co. Pte Ltden_US
dc.relation.ispartofSurface Review and Lettersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject3D surface roughness; CFRP composite material; drillability; Taguchi methoden_US
dc.titleInvestigation of Surface Morphology of Drilled Cfrp Plates and Optimization of Cutting Parametersen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
0384.pdf
Boyut:
1.46 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu