Experimental and statistical analysis of the effect of reinforcement element Ni(K)Gr on the wear of Al/B4C/Ni(K)Gr metal matrix composite materials
Küçük Resim Yok
Tarih
2026
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Sage Publications Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, four different Al/B4C/Ni(K)Gr metal matrix composite (MMC) materials were produced by using the hot pressing technique by adding 8% by weight B4C reinforcement element and different ratios (0, 3, 5 and 7%) Ni(K)Gr reinforcement element into the aluminum alloy whose matrix element is Alumix 13. Wear tests of the produced metal matrix composites were carried out under four loads (10, 20, 30, and 40N) at a sliding speed of 0.8 m/s and a sliding distance of 1200 m. The study concluded that the MMC material number exhibited the minimal wear loss. The MMC material called K1, containing 8% B4C, showed the lowest wear loss at a sliding distance of 300 m under a load of 10 N, while the material K4, containing 8% B4C + 7% Ni(K)Gr, showed the highest wear loss at a sliding distance of 1200 m under a load of 40 N. When the ANOVA results were examined, it was found that sliding distance had the most significant effect on wear loss in MMC materials, accounting for 52.34%.
Açıklama
Anahtar Kelimeler
[Keyword Not Available]
Kaynak
Journal of Composite Materials
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
