Determination of machinery and knife strains in the planing of wood-based panels

Basit Öğe Kaydı
dc.contributor.authorGürleyen, Levent
dc.contributor.authorBudakçı, Mehmet
dc.date.accessioned2020-05-01T09:11:20Z
dc.date.available2020-05-01T09:11:20Z
dc.date.issued2015
dc.departmentDÜ, Teknoloji Fakültesi, Ağaç İşleri Endüstri Mühendisliği Bölümüen_US
dc.descriptionWOS: 000359137800007en_US
dc.description.abstractIn this study, strains that are caused by wood-based panels on horizontal milling machines and other cutting devices were examined. In order to fulfill this aim, samples of wood-based panels such as particleboard, medium density fiberboard (MDF), blockboard, okoume (Aucoumea klaineana) plywood, poplar (Populus x euramericana) plywood, and oriented strand board (OSB) were examined. The strains that milling machines and planer head with reversible knives suffered were measured by an amperemeter using an experimental mechanism with six different wood-based panels, three different engine revolution speeds (rev/min), and three drive forward speeds (m/min). Using the experimental data and the data derived from wood-based panels, engine revolution speed, and drive forward speed, several regression equations were developed in order to anticipate probable strains for each of the wood-based panels. As a consequence, the utmost strains observed on machinery during planing were caused by okoume plywood, followed by MDF, OSB, particleboard, blockboard, and poplar plywood in decreasing order of intensity. It was also observed that the spent current values (A) increased during planing in which engine revolution speed and drive forward speed are always kept high. It was also clearly seen that the wood-based panels were more resistant to the machinery and the knives when they were operated at higher speeds. The results of experiments correlated well with the predicted values produced by the anticipation regression models (R-2 = 0.898-0.965).en_US
dc.identifier.doi10.1007/s10086-015-1481-zen_US
dc.identifier.endpage400en_US
dc.identifier.issn1435-0211
dc.identifier.issn1611-4663
dc.identifier.issue4en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage391en_US
dc.identifier.urihttps://doi.org/10.1007/s10086-015-1481-z
dc.identifier.urihttps://hdl.handle.net/20.500.12684/5518
dc.identifier.volume61en_US
dc.identifier.wosWOS:000359137800007en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Japan Kken_US
dc.relation.ispartofJournal Of Wood Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWood-based panelsen_US
dc.subjectPlaningen_US
dc.subjectStrainen_US
dc.subjectElectrical currenten_US
dc.subjectResistanceen_US
dc.titleDetermination of machinery and knife strains in the planing of wood-based panelsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
5518.pdf
Boyut:
847.15 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu