EXPERIMENTAL AND STATISTICAL INVESTIGATION OF SURFACE ROUGHNESS AND VIBRATION DURING FINISH TURNING OF AISI 4140 STEEL WORKPIECE UNDER COOLING METHOD

Basit Öğe Kaydı
dc.authoridkam, Menderes/0000-0002-9813-559X
dc.contributor.authorKam, Menderes
dc.contributor.authorSeremet, Musa
dc.date.accessioned2021-12-01T18:47:24Z
dc.date.available2021-12-01T18:47:24Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractIn this study, the surface roughness (R-a) and vibration (Vib) during finish turning of AISI 4140 (52HRc) steel workpiece under cooling method were investigated as experimental and statistical. Taguchi method was used in statistical investigation of obtained data from the finish turning experiments. As cutting parameters, cutting speed: 160, 200, 240 and 280m/min, feed rate: 0.08 and 0.16mm/rev, depth of cut: 0.15 and 0.3mm, and cooling method: dry/wet were selected for this experimental study. Vibration values during finish turning of steel workpiece were collected online by accelerometers and R-a measurement device was used to obtain the R-a values. Optimum R-a and Vib values were obtained in finish turning of this workpiece. The cutting parameters determined for optimum R-a values were obtained as 0.08mm/rev of feed rate, 200m/min of cutting speed, wet turning process of cooling method, and 0.30mm of depth of cut. Optimum Vib values were obtained as 0.08mm/rev, 240m/min, dry turning and 0.15mm. Experimental results for the lowest R-a and Vib were found as 0.219 mu m and 0.003463gRMS. The predicted values for the R-a and the Vib were 0.222 mu m and 0.003328gRMS, respectively.en_US
dc.identifier.doi10.1142/S0218625X2150092X
dc.identifier.issn0218-625X
dc.identifier.issn1793-6667
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-85108993363en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://doi.org/10.1142/S0218625X2150092X
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10261
dc.identifier.volume28en_US
dc.identifier.wosWOS:000705629700009en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWorld Scientific Publ Co Pte Ltden_US
dc.relation.ispartofSurface Review And Lettersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAISI 4140 steelen_US
dc.subjectfinish turningen_US
dc.subjectsurface roughnessen_US
dc.subjectTaguchi methoden_US
dc.subjectvibrationen_US
dc.subjectcooling methoden_US
dc.subjectCutting Parametersen_US
dc.subjectMechanical-Propertiesen_US
dc.subjectOptimizationen_US
dc.subjectToolen_US
dc.subjectMartensiteen_US
dc.subjectHardnessen_US
dc.titleEXPERIMENTAL AND STATISTICAL INVESTIGATION OF SURFACE ROUGHNESS AND VIBRATION DURING FINISH TURNING OF AISI 4140 STEEL WORKPIECE UNDER COOLING METHODen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu