Comparative Life Cycle and Machinability Assessment of Milling WAAM and Wrought Inconel 925

dc.contributor.authorMakhesana, Mayur
dc.contributor.authorJha, Anuj
dc.contributor.authorPatel, Kaushik
dc.contributor.authorSirin, Senol
dc.contributor.authorSingh, Gurminder
dc.contributor.authorKhanna, Navneet
dc.date.accessioned2026-07-01T11:40:08Z
dc.date.available2026-07-01T11:40:08Z
dc.date.issued2026
dc.departmentDüzce Üniversitesi
dc.description.abstractOne of the significant challenges the manufacturing industry faces is creating sustainable machining processes that strike a balance between economic productivity and energy consumption. To address this challenge, this work is focused on a comprehensive life cycle assessment (LCA) analysis and machinability analysis during the milling of wrought and wire arc additively manufactured (WAAMed) Inconel 925 (IN925). In addition, the work offers an in-depth description of the steps essential to conduct LCA. Four conditions are used for machining experiments: dry, flood cooling, minimum quantity lubrication (MQL), and hybrid nanofluid MQL (HNMQL). LCA is performed for 18 environmental impact categories using the ReCiPe 2016 Midpoint (H) impact assessment method. The comparison study demonstrated the potential benefits of additive manufacturing, especially in terms of lower material waste and energy efficiency. Using HNMQL reduced surface roughness by approximately 19-46% for wrought and 25-51% for WAAMed IN925. Further, the tool wear under HNMQL is reduced by 11% and 32% than MQL and flood cooling. Applying hybrid nanofluid MQL revealed a good balance between machinability and environmental effects for machining WAAMed IN925. However, the interpretation also underscored the critical role of the machining phase, urging industries to prioritize optimization strategies and innovative cooling techniques to minimize environmental impacts further.
dc.identifier.doi10.1007/s11665-025-12238-7
dc.identifier.endpage7954
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.issue8
dc.identifier.orcid0009-0005-4201-427X
dc.identifier.scopus2-s2.0-105017881886
dc.identifier.scopusqualityQ2
dc.identifier.startpage7934
dc.identifier.urihttps://doi.org/10.1007/s11665-025-12238-7
dc.identifier.urihttps://hdl.handle.net/20.500.12684/23660
dc.identifier.volume35
dc.identifier.wosWOS:001585489700001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer
dc.relation.ispartofJournal of Materials Engineering and Performance
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20260623
dc.subjectHybrid Nanofluid Mql
dc.subjectInconel 925
dc.subjectLife Cycle Assessment
dc.subjectMql
dc.subjectVegetable Oil
dc.subjectWire Arc Additive Manufacturing (Waam)
dc.titleComparative Life Cycle and Machinability Assessment of Milling WAAM and Wrought Inconel 925
dc.typeArticle

Dosyalar