Investigation of the Effect of Cryogenic Treatment Cubic Boron Nitride Turning Insert Tools

Basit Öğe Kaydı
dc.contributor.authorAkincioglu, Gulsah
dc.date.accessioned2021-12-01T18:47:31Z
dc.date.available2021-12-01T18:47:31Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractSuperalloys are difficult to process. For this reason, it is important to increase the surface quality of the material and reduce the tool consumption. In the present work, the shallow and deep cryogenically treated performance of cubic boron nitride (CBN) inserts in terms of surface roughness, tool wear, thrust force and chip formation under dry cutting conditions for finish turning of Hastelloy C22. The effect of CBN tools on cutting force, surface roughness, hardness and chip morphology was investigated by applying shallow and deep cryogenic treatment. With the surface roughness values obtained with the deep cryogenic-treated tools (DCT) tool, 137.1% and 73.8% improvements were achieved compared to the RT (Reference tools) and Shallow cryogenic-treated tools (SCT) tools, respectively. DCT and SCT tool were 31.58% and 5.5% lower than the cutting forces obtained with the RT cutting tools, respectively. According to ANOVA analysis, the most effective parameter affecting the surface roughness was determined as the feed with a 67.8% contribution.en_US
dc.identifier.doi10.1007/s11665-021-05453-5
dc.identifier.endpage1288en_US
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85099542580en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1280en_US
dc.identifier.urihttps://doi.org/10.1007/s11665-021-05453-5
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10297
dc.identifier.volume30en_US
dc.identifier.wosWOS:000608943900003en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorAkincioglu, Gulsah
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal Of Materials Engineering And Performanceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCBN inserten_US
dc.subjectcryogenic treatmenten_US
dc.subjectsurface roughnessen_US
dc.subjectcutting forceen_US
dc.titleInvestigation of the Effect of Cryogenic Treatment Cubic Boron Nitride Turning Insert Toolsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
10297.pdf
Boyut:
1.41 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu