Surface roughness and brightness of scots pine (Pinus sylvestris) applied with water-based varnish after densification and heat treatment

Basit Öğe Kaydı
dc.contributor.authorPelit, Hüseyin
dc.contributor.authorBudakçı, Mehmet
dc.contributor.authorSönmez, Abdullah
dc.contributor.authorBurdurlu, Erol
dc.date.accessioned2020-04-30T23:32:20Z
dc.date.available2020-04-30T23:32:20Z
dc.date.issued2015
dc.departmentDÜ, Teknoloji Fakültesi, Ağaç İşleri Endüstri Mühendisliği Bölümüen_US
dc.descriptionWOS: 000365710800006en_US
dc.description.abstractThis research was aimed at determining the surface roughness and surface brightness properties of Scots pine (Pinus sylvestris L.) wood samples to which water-based varnishes were applied after thermo-mechanical densification and heat treatment. Samples; after densifying by compression in the radial direction at two different rates (20 and 40 %) and two different temperatures (110 and 150 A degrees C), samples were subjected to 2 h of heat treatment at 190, 200, and 210 A degrees C. Then, surface of the samples was varnished with one-component (OCW) and two-component (TCW) water-based varnishes. The changes occurring in surface roughness and surface brightness of the samples were determined according to the basis of TS 2495 EN ISO 3274, TS 6212 EN ISO 4288 and TS EN ISO 2813. According to results of the research, surface roughness decreased and surface brightness increased in densified samples. On the other hand, an increase in the heat treatment temperature led to an increase in surface roughness and a decrease in surface brightness. Also, regarding the effect of varnish type on both surface roughness and surface brightness, better results were obtained in the surface OCW applied compared to those TCW applied.en_US
dc.identifier.doi10.1007/s10086-015-1506-7en_US
dc.identifier.endpage594en_US
dc.identifier.issn1435-0211
dc.identifier.issn1611-4663
dc.identifier.issue6en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage586en_US
dc.identifier.urihttps://doi.org/10.1007/s10086-015-1506-7
dc.identifier.urihttps://hdl.handle.net/20.500.12684/4690
dc.identifier.volume61en_US
dc.identifier.wosWOS:000365710800006en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Japan Kken_US
dc.relation.ispartofJournal Of Wood Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWood densificationen_US
dc.subjectHeat treatmenten_US
dc.subjectWater-based varnishen_US
dc.subjectSurface roughnessen_US
dc.subjectBrightnessen_US
dc.titleSurface roughness and brightness of scots pine (Pinus sylvestris) applied with water-based varnish after densification and heat treatmenten_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
4690.pdf
Boyut:
871.46 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu