Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL

Yükleniyor...
Küçük Resim

Tarih

2021

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Elsevier Sci Ltd

Erişim Hakkı

info:eu-repo/semantics/closedAccess

Özet

Nickel alloy X-750 which is difficult-to-machine material, is employed in many critical fields owing to its superior mechanical and thermal properties. However, these superior features lead to some difficulties in its machinability especially when using carbide tool materials. Hence, ceramic cutting tools (CCTs) having excellent hardness, heat and abrasion resistance, and poor chemical proximity to workpiece material are a perfect choice in machining operations of such materials. Considering this, the current study focused on the influence of various cutting environment, i.e., dry, base fluid-MQL without any mixed nanoparticles (BF-MQL) and hBN dispersed nanofluid-MQL (NF-MQL) on surface roughness, 2D-surface topography, maximum cutting temperature, cutting force, micro-hardness, flank wear and its mechanism when milling of alloy X-750 with Sialon ceramic tools. As a result, surface roughness was reduced by about 39% and 47.2% with BF-MQL (0 vol% additive) and hBN mixed NF-MQL, respectively compared to dry machining environment. Also the noticeable improvement with NF-MQL environment in 2D-surface topography of workpice, cutting temperature and cutting force has been achieved, the dry machining offered less tool wear for CCT than both BF-MQL and NF-MQL.

Açıklama

Anahtar Kelimeler

Sialon ceramic cutting tool, Flank wear, hBN mixed nano-cutting fluid, Nickel alloy X-750, Minimum Quantity Lubrication, High-Speed, Wear Mechanisms, Inconel 718, Carbide Tools, Oil, Temperature, Fluid, Parameters, Behavior

Kaynak

Tribology International

WoS Q Değeri

Q1

Scopus Q Değeri

Q1

Cilt

153

Sayı

Künye