Effect of Tincal Particle Reinforcement on the Tribological Behaviors of Polyester and Vinyl Ester Composites

Küçük Resim Yok

Tarih

2026

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Asme

Erişim Hakkı

info:eu-repo/semantics/closedAccess

Özet

Composite materials, widely utilized across diverse industries, comprise various reinforcement phases (fibrous or particulate) and matrix phases (polymeric, ceramic, or metallic). However, thermoset polymers, notably polyester and vinyl ester resins, may experience a decrease in strength over time. This wear-induced weakening renders materials susceptible to external factors, leading to structural damage. To mitigate these effects, research has often focused on resin modification, frequently involving the incorporation of particles. These particles enhance the material's wear resistance when integrated into the resin matrix. However, studies on the wear behaviors of polyester and vinyl ester resins are limited. This study experimentally investigated the wear properties of polyester and vinyl ester resins reinforced with tincal particles. Results showed that the addition of tincal improved the wear performance of both resins. For vinyl ester, the optimal enhancement occurred at 1 wt% tincal, resulting in a reduction of the coefficient of friction by similar to 30% and an improvement in wear resistance by about 20%. Polyester composites exhibited a steady progress up to 3 wt% tincal, resulting in nearly 40% lower friction compared to the pure resin. Scanning electron microscopy (SEM) analysis confirmed smoother worn surfaces and fewer grooves in tincal-filled samples. These findings highlight tincal as a cost-effective, naturally abundant filler that enhances the tribological durability of thermosetting resin composites.

Açıklama

Anahtar Kelimeler

[Keyword Not Available]

Kaynak

Journal of Tribology-Transactions of the Asme

WoS Q Değeri

Q2

Scopus Q Değeri

Q1

Cilt

148

Sayı

4

Künye