Performance of Multilayer Coated and Cryo-Treated Uncoated Tools in Machining of AISI H13 Tool Steel-Part 1: Tungsten Carbide End Mills

Basit Öğe Kaydı
dc.contributor.authorCicek, Adem
dc.contributor.authorKivak, Turgay
dc.contributor.authorEkici, Ergun
dc.contributor.authorKara, Fuat
dc.contributor.authorUcak, Necati
dc.date.accessioned2021-12-01T18:49:57Z
dc.date.available2021-12-01T18:49:57Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractThis paper focused on the performance of tungsten carbide end mills in machining of AISI H13 hot work tool steel under dry and wet conditions. The tool performance was evaluated in terms of resultant cutting force (Fc), average surface roughness (Ra) and tool life. In the milling tests, four categories of end mills were used: untreated (U), cryo-treated (CT), cryo-treated and tempered uncoated (CTT) and TiAlN/TiN multilayer coated (MLC). The tests were performed at four cutting speeds (80, 100, 120, 140 m/min), three feeds (0.08, 0.12, 0.16 mm/rev) and a depth of cut (2 mm). The test results showed that the lowest values of Fc and Ra were obtained with the use of MLC end mills. However, the cryogenic treatment was also effective on decreasing Fc and Ra. In addition, while the CTT end mills provided a slight improvement in tool life under dry conditions, they showed a remarkable improvement of 126.1% in comparison with the untreated ones under wet conditions. Although the CTT end mills exhibited a superior performance to U and CT ones, the MLC end mills were much more resistant to abrasive wear. This study is organized into two parts (WC-Co and HSS) to observe the effects of deep cryogenic treatment on performance of two different tool materials and to compare cryo-treated end mills with multilayer coated ones. This part is related to the cryogenic treatment of tungsten carbide end mills, whereas part two is regarding cryo-treated HSS end mills.en_US
dc.description.sponsorshipDuzce University Scientific Research Project DivisionDuzce University [BAP - 2011.03.02.065]en_US
dc.description.sponsorshipThe authors wish to place their sincere thanks to Duzce University Scientific Research Project Division for financial support for the Project No: BAP - 2011.03.02.065en_US
dc.identifier.doi10.1007/s11665-021-05656-w
dc.identifier.endpage3445en_US
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85103008043en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage3436en_US
dc.identifier.urihttps://doi.org/10.1007/s11665-021-05656-w
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10805
dc.identifier.volume30en_US
dc.identifier.wosWOS:000632341800007en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal Of Materials Engineering And Performanceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectcryogenic treatmenten_US
dc.subjectcutting forceen_US
dc.subjectsurface roughnessen_US
dc.subjecttool lifeen_US
dc.subjectWC-Co end millsen_US
dc.titlePerformance of Multilayer Coated and Cryo-Treated Uncoated Tools in Machining of AISI H13 Tool Steel-Part 1: Tungsten Carbide End Millsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
10805.pdf
Boyut:
3.34 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu