Performance of cryogenically treated M35 HSS drills in drilling of austenitic stainless steels

Basit Öğe Kaydı
dc.contributor.authorÇiçek, Adem
dc.contributor.authorKıvak, Turgay
dc.contributor.authorUygur, İlyas
dc.contributor.authorEkici, Ergün
dc.contributor.authorTurgut, Yakup
dc.date.accessioned2020-04-30T23:20:47Z
dc.date.available2020-04-30T23:20:47Z
dc.date.issued2012
dc.departmentDÜ, Teknoloji Fakültesi, Makine ve İmalat Mühendisliği Bölümüen_US
dc.descriptionWOS: 000302407100005en_US
dc.description.abstractIn this study, performance of cryogenically treated M35 high speed steel (HSS) twist drills in drilling of AISI 304 and 316 stainless steels was evaluated in terms of thrust force, surface roughness, tool wear, tool life, and chip formation. To present the differences in tool performance between untreated and treated drills, and machinability between AISI 304 SS and AISI 316 SS, a number of experiments were performed at different combinations of cutting speed, and feed rate. As the results of the conducted experiments, the treated drills showed better performance than untreated drills in terms of thrust force, surface roughness, and tool wear and tool life for both types of stainless steels. Tool lives of treated HSS drills in drilling of AISI 304 SS and AISI 316 SS improved 32% and 14%, respectively, when compared with untreated drills. Experimental results also showed that machinability of AISI 304 SS was harder than the machinability of AISI 316 SS.en_US
dc.description.sponsorshipDuzce University Scientific Research Project DivisionDuzce University [BAP 2009.03.02.030]en_US
dc.description.sponsorshipThe authors wish to place their sincere thanks to Duzce University Scientific Research Project Division for financial support for the Project No: BAP 2009.03.02.030.en_US
dc.identifier.doi10.1007/s00170-011-3616-8en_US
dc.identifier.endpage73en_US
dc.identifier.issn0268-3768
dc.identifier.issn1433-3015
dc.identifier.issue01.Apren_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage65en_US
dc.identifier.urihttps://doi.org/10.1007/s00170-011-3616-8
dc.identifier.urihttps://hdl.handle.net/20.500.12684/4079
dc.identifier.volume60en_US
dc.identifier.wosWOS:000302407100005en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer London Ltden_US
dc.relation.ispartofInternational Journal Of Advanced Manufacturing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCryogenic treatmenten_US
dc.subjectTool wearen_US
dc.subjectSurface roughnessen_US
dc.subjectChip formationen_US
dc.titlePerformance of cryogenically treated M35 HSS drills in drilling of austenitic stainless steelsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
4079.pdf
Boyut:
766.75 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu