Application of Taguchi method for determining optimum surface roughness in turning of high-alloy white cast iron

Basit Öğe Kaydı
dc.contributor.authorGünay, Mustafa
dc.contributor.authorYücel, Emre
dc.date.accessioned2020-04-30T22:39:34Z
dc.date.available2020-04-30T22:39:34Z
dc.date.issued2013
dc.departmentDÜ, Teknik Eğitim Fakültesi, Makine Eğitimi Bölümüen_US
dc.descriptionWOS: 000314428600009en_US
dc.description.abstractThis paper focused on optimizing the cutting conditions for the average surface roughness (R-a) obtained in machining of high-alloy white cast iron (Ni-Hard) at two different hardness levels (50 HRC and 62 HRC). Machining experiments were performed at the CNC lathe using ceramic and cubic boron nitride (CBN) cutting tools on Ni-Hard materials. Cutting speed, feed rate and depth of cut were chosen as the cutting parameters. Taguchi L-18 orthogonal array was used to design of experiment. Optimal cutting conditions was determined using the signal-to-noise (S/N) ratio which was calculated for R-a according to the "the-smaller-the-better" approach. The effects of the cutting parameters and tool materials on surface roughness were evaluated by the analysis of variance. The statistical analysis indicated that the parameters that have the biggest effect on R-a for Ni-Hard materials with 50 HRC and 62 HRC are the cutting speed and feed rate, respectively. Additionally, the optimum cutting conditions for the materials with 50 HRC and 62 HRC was found at different levels. (C) 2012 Elsevier Ltd. All rights reserved.en_US
dc.description.sponsorshipScientific Research Project Unit of Karabuk UniversityKarabuk University [KBU-BAP-C-11-Y 027]en_US
dc.description.sponsorshipThis study is supported by Scientific Research Project Unit of Karabuk University (KBU-BAP-C-11-Y 027), the authors express appreciation for this support.en_US
dc.identifier.doi10.1016/j.measurement.2012.10.013en_US
dc.identifier.endpage919en_US
dc.identifier.issn0263-2241
dc.identifier.issn1873-412X
dc.identifier.issue2en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage913en_US
dc.identifier.urihttps://doi.org/10.1016/j.measurement.2012.10.013
dc.identifier.urihttps://hdl.handle.net/20.500.12684/2766
dc.identifier.volume46en_US
dc.identifier.wosWOS:000314428600009en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMeasurementen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectNi-Harden_US
dc.subjectMachiningen_US
dc.subjectTool materialsen_US
dc.subjectSurface roughnessen_US
dc.subjectOptimizationen_US
dc.titleApplication of Taguchi method for determining optimum surface roughness in turning of high-alloy white cast ironen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
2766.pdf
Boyut:
603.8 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu