Taguchi method based optimisation of drilling parameters in drilling of AISI 316 steel with PVD monolayer and multilayer coated HSS drills

Basit Öğe Kaydı
dc.contributor.authorKıvak, Turgay
dc.contributor.authorSamtaş, Gürcan
dc.contributor.authorÇiçek, Adem
dc.date.accessioned2020-04-30T23:32:31Z
dc.date.available2020-04-30T23:32:31Z
dc.date.issued2012
dc.departmentDÜ, Cumayeri Meslek Yüksekokuluen_US
dc.descriptionWOS: 000304642400023en_US
dc.description.abstractThis paper focuses on the optimisation of drilling parameters using the Taguchi technique to obtain minimum surface roughness (Ra) and thrust force (Ff). A number of drilling experiments were conducted using the L16 orthogonal array on a CNC vertical machining centre. The experiments were performed on AISI 316 stainless steel blocks using uncoated and coated M35 HSS twist drills under dry cutting conditions. Analysis of variance (ANOVA) was employed to determine the most significant control factors affecting the surface roughness and thrust force. The cutting tool, cutting speed and feed rate were selected as control factors. After the sixteen experimental trials, it was found that the cutting tool was the most significant factor on the surface roughness and that the feed rate was the most significant factor on the thrust force. The results of the confirmation experiments showed that the Taguchi method was notably successful in the optimisation of drilling parameters for better surface roughness and thrust force. (C) 2012 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.measurement.2012.02.022en_US
dc.identifier.endpage1557en_US
dc.identifier.issn0263-2241
dc.identifier.issue6en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1547en_US
dc.identifier.urihttps://doi.org/10.1016/j.measurement.2012.02.022
dc.identifier.urihttps://hdl.handle.net/20.500.12684/4744
dc.identifier.volume45en_US
dc.identifier.wosWOS:000304642400023en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMeasurementen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCoating materialsen_US
dc.subjectHSS drillsen_US
dc.subjectSurface roughnessen_US
dc.subjectThrust forceen_US
dc.subjectTaguchi methoden_US
dc.titleTaguchi method based optimisation of drilling parameters in drilling of AISI 316 steel with PVD monolayer and multilayer coated HSS drillsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
4744.pdf
Boyut:
1.12 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu