Punch Geometry and Burr Height on Blanking Process for Garbage Container Wheel Parts

dc.contributor.authorUygur, Ilyas
dc.contributor.authorKocasungur, Halit
dc.contributor.authorAkincioglu, Sitki
dc.contributor.authorOktem, Hasan
dc.date.accessioned2026-07-01T11:36:36Z
dc.date.available2026-07-01T11:36:36Z
dc.date.issued2025
dc.departmentDüzce Üniversitesi
dc.description8th International Conference on Technology, Engineering and Science, IConTES 2025 -- 12 November 2025 through 15 November 2025 -- Antalya -- 347549
dc.description.abstractSheet metal punching process is a manufacturing method frequently used in many industries such as packaging, construction, aerospace, machinery, chemistry and electronics. Today, a large number of parts are produced from hair materials in almost all areas of industry. The fact that the parts produced are generally in the millions and that delivery times are limited increases the importance of molds day by day. During production, it is desirable that the wear rate of the mold be kept to a minimum, that it does not cause problems during operation, that it be suitable for mass production of parts, and that the dimensional tolerances of the produced parts remain within the specified limits. In this study, holes were obtained with punches with different geometric surfaces and punch performances were evaluated by comparing average burr heights. As a result of the study, burr height increased with increasing stroke. Plain punch showed the best performance, while the worst performance and burr height were obtained with channel punch. TiN coated channel punch was among these two punches. The performance difference between plain punch and channel punch was around 10%. © 2025 Published by ISRES.
dc.identifier.doi10.55549/epstem.1273
dc.identifier.endpage566
dc.identifier.isbn978-625695983-5
dc.identifier.issn2602-3199
dc.identifier.scopus2-s2.0-105030091429
dc.identifier.scopusqualityQ4
dc.identifier.startpage559
dc.identifier.urihttps://doi.org/10.55549/epstem.1273
dc.identifier.urihttps://hdl.handle.net/20.500.12684/23131
dc.identifier.volume38
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherISRES Publishing
dc.relation.ispartofEurasia Proceedings of Science, Technology, Engineering and Mathematics
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_Scopus_20260623
dc.subjectBurr height
dc.subjectPunch geometry
dc.subjectPunching
dc.subjectWear
dc.titlePunch Geometry and Burr Height on Blanking Process for Garbage Container Wheel Parts
dc.typeConference Object

Dosyalar