Punch Geometry and Burr Height on Blanking Process for Garbage Container Wheel Parts
Küçük Resim Yok
Tarih
2025
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
ISRES Publishing
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Sheet metal punching process is a manufacturing method frequently used in many industries such as packaging, construction, aerospace, machinery, chemistry and electronics. Today, a large number of parts are produced from hair materials in almost all areas of industry. The fact that the parts produced are generally in the millions and that delivery times are limited increases the importance of molds day by day. During production, it is desirable that the wear rate of the mold be kept to a minimum, that it does not cause problems during operation, that it be suitable for mass production of parts, and that the dimensional tolerances of the produced parts remain within the specified limits. In this study, holes were obtained with punches with different geometric surfaces and punch performances were evaluated by comparing average burr heights. As a result of the study, burr height increased with increasing stroke. Plain punch showed the best performance, while the worst performance and burr height were obtained with channel punch. TiN coated channel punch was among these two punches. The performance difference between plain punch and channel punch was around 10%. © 2025 Published by ISRES.
Açıklama
8th International Conference on Technology, Engineering and Science, IConTES 2025 -- 12 November 2025 through 15 November 2025 -- Antalya -- 347549
Anahtar Kelimeler
Burr height, Punch geometry, Punching, Wear
Kaynak
Eurasia Proceedings of Science, Technology, Engineering and Mathematics
WoS Q Değeri
Scopus Q Değeri
Q4
Cilt
38
