Design and Implementation of a Wireless Charging System Connected to the AC Grid for an E-Bike
dc.authorid | YILDIRIZ, Emin/0000-0002-6003-6780 | |
dc.authorwosid | YILDIRIZ, Emin/AAD-6219-2020 | |
dc.contributor.author | Yıldırız, Emin | |
dc.contributor.author | Bayraktar, Murat | |
dc.date.accessioned | 2023-07-26T11:57:51Z | |
dc.date.available | 2023-07-26T11:57:51Z | |
dc.date.issued | 2022 | |
dc.department | DÜ, Mühendislik Fakültesi, Elektrik-Elektronik Mühendisliği Bölümü | en_US |
dc.description.abstract | This paper aims to design an IPT for wireless charging of an e-bike and to control the charge of the e-bike from the primary-side. Optimum IPT design has been made according to the 36 V battery bank requirements. The no-load condition test has been performed before charging started in the IPT system connected to the AC grid. The primary-side DC-link voltage of 4-5 V required for this test is provided by the designed forward converter. The charge control has been also made from the forward converter on the primary-side. For this, the forward converter's operation in peak current mode (PCM) has been used. Finally, a prototype has been implemented that works at a maximum DC/DC efficiency of 87.52% in full alignment and 83.63% in 3 cm misalignment. The proposed control algorithm has been tested in this prototype at different load stages. | en_US |
dc.description.sponsorship | Farba Automotive | en_US |
dc.description.sponsorship | This research and the APC were funded by [Farba Automotive]. | en_US |
dc.identifier.doi | 10.3390/en15124262 | |
dc.identifier.issn | 1996-1073 | |
dc.identifier.issue | 12 | en_US |
dc.identifier.scopus | 2-s2.0-85132719120 | en_US |
dc.identifier.scopusquality | Q1 | en_US |
dc.identifier.uri | https://doi.org/10.3390/en15124262 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12684/13325 | |
dc.identifier.volume | 15 | en_US |
dc.identifier.wos | WOS:000818501300001 | en_US |
dc.identifier.wosquality | Q3 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.institutionauthor | Yıldırız, Emin | |
dc.language.iso | en | en_US |
dc.publisher | Mdpi | en_US |
dc.relation.ispartof | Energies | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.snmz | $2023V1Guncelleme$ | en_US |
dc.subject | Inductive Power Transfer; Wireless Charging; E-Bikes; Forward Converter | en_US |
dc.subject | Power Transfer | en_US |
dc.title | Design and Implementation of a Wireless Charging System Connected to the AC Grid for an E-Bike | en_US |
dc.type | Article | en_US |
Dosyalar
Orijinal paket
1 - 1 / 1
Yükleniyor...
- İsim:
- 13325.pdf
- Boyut:
- 3.19 MB
- Biçim:
- Adobe Portable Document Format
- Açıklama:
- Tam Metin / Full Text