Statistical Analysis of the Effect of the Cutting Tool Coating Type on Sustainable Machining Parameters

Basit Öğe Kaydı
dc.authoridKARA, Fuat/0000-0002-3811-3081
dc.contributor.authorOzbek, Nursel Altan
dc.contributor.authorOzbek, Onur
dc.contributor.authorKara, Fuat
dc.date.accessioned2021-12-01T18:47:01Z
dc.date.available2021-12-01T18:47:01Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractGood surface roughness and topography are of great importance in plastic mold materials. This study investigated the effects of cutting parameters on cutting temperature, vibration (g), surface roughness (Ra), and noise (N) in the turning of AISI P20 die steel using coated tungsten carbide cutting tools. Experiments were carried out using the Taguchi L-18 experimental design with cutting tools with two different types of coatings (CVD and PVD), three different cutting speeds (100, 150, and 200 m/min), three different feed rates (0.1, 0.15, and 0.2 mm/rev), and a constant cutting depth (1 mm). As a result of the study, the PVD-coated tools exhibited a higher performance for all outputs (cutting temperature, g, Ra, and N). It was observed that the vibration and surface roughness were proportional, vibration was mostly affected by feed rate, and increasing cutting speed and feed rate also increased the temperature and noise in the cutting zone. According to ANOVA results, the most effective parameter on surface roughness was feed rate (97.24%), the most effective parameter on vibration was cutting tool type (57.34%), and finally, the most effective parameter on noise was feed rate (50.37%).en_US
dc.identifier.doi10.1007/s11665-021-06066-8
dc.identifier.endpage7795en_US
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-85113340973en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage7783en_US
dc.identifier.urihttps://doi.org/10.1007/s11665-021-06066-8
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10100
dc.identifier.volume30en_US
dc.identifier.wosWOS:000687546800008en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal Of Materials Engineering And Performanceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAISI P20en_US
dc.subjectCVDen_US
dc.subjectPVDen_US
dc.subjectcutting temperatureen_US
dc.subjectnoiseen_US
dc.subjectsurface roughnessen_US
dc.subjectsustainable machiningen_US
dc.subjectvibrationen_US
dc.subjectSurface-Roughnessen_US
dc.subjectCryogenic Treatmenten_US
dc.subjectWearen_US
dc.subjectPredictionen_US
dc.subjectVibrationen_US
dc.subjectPvden_US
dc.subjectCvden_US
dc.subjectTemperatureen_US
dc.subjectForceen_US
dc.subjectSteelen_US
dc.titleStatistical Analysis of the Effect of the Cutting Tool Coating Type on Sustainable Machining Parametersen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
10100.pdf
Boyut:
2.76 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu