Optimization of 3D Printing Process Parameters on Mechanical Behaviors and Printing Time of ABS, PLA, PET-G Products using Taguchi Method

Basit Öğe Kaydı
dc.contributor.authorKam, Menderes
dc.contributor.authorIpekci, Ahmet
dc.date.accessioned2021-12-01T18:47:01Z
dc.date.available2021-12-01T18:47:01Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractThe effect of three important printing process parameters such as filament materials (ABS Acrylonitrile Butadiene Styrene, PLA - Poly Lactic Acid, PET-G - Polyethylene Terephthalate Glycol), layer thickness (0.15, 0.2, and 0.25 mm), and raster angle (30, 45, and 60) were investigated on mechanical behaviors and printing time of the prepared products. Taguchi method is applied to reduce the number of test, determined the optimum process parameters for high mechanical behaviors, low printing time, and product weight. Analytical methods such as Signal/Noise ratio, regression analysis, and variance analysis were used to evaluate the effects of three-dimensional (3D) printing parameters on mechanical behaviors and printing time. The results showed that the optimum 3D printing parameters for the strength were filament material of PET-G, layer thickness of 0.25 mm, and raster angle of 45 degrees. The raster angle of 45 degrees is the optimum mechanical behaviors at each individual layer when compared to other raster angles of 30 degrees and 60 degrees. Finally, statistical study was performed for prediction of mechanical behaviors and printing time of products.en_US
dc.identifier.endpage401en_US
dc.identifier.issn0257-9731
dc.identifier.issue4en_US
dc.identifier.startpage393en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10101
dc.identifier.volume42en_US
dc.identifier.wosWOS:000695647500006en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherChinese Soc Mechanical Engineersen_US
dc.relation.ispartofJournal Of The Chinese Society Of Mechanical Engineersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFDMen_US
dc.subjectmechanical behaviorsen_US
dc.subjectprinting timeen_US
dc.subjectTaguchien_US
dc.subjectDesignen_US
dc.subjectPartsen_US
dc.subjectStrengthen_US
dc.titleOptimization of 3D Printing Process Parameters on Mechanical Behaviors and Printing Time of ABS, PLA, PET-G Products using Taguchi Methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu