Optimization of 3D Printing Process Parameters on Mechanical Behaviors and Printing Time of ABS, PLA, PET-G Products using Taguchi Method
Küçük Resim Yok
Tarih
2021
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Chinese Soc Mechanical Engineers
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The effect of three important printing process parameters such as filament materials (ABS Acrylonitrile Butadiene Styrene, PLA - Poly Lactic Acid, PET-G - Polyethylene Terephthalate Glycol), layer thickness (0.15, 0.2, and 0.25 mm), and raster angle (30, 45, and 60) were investigated on mechanical behaviors and printing time of the prepared products. Taguchi method is applied to reduce the number of test, determined the optimum process parameters for high mechanical behaviors, low printing time, and product weight. Analytical methods such as Signal/Noise ratio, regression analysis, and variance analysis were used to evaluate the effects of three-dimensional (3D) printing parameters on mechanical behaviors and printing time. The results showed that the optimum 3D printing parameters for the strength were filament material of PET-G, layer thickness of 0.25 mm, and raster angle of 45 degrees. The raster angle of 45 degrees is the optimum mechanical behaviors at each individual layer when compared to other raster angles of 30 degrees and 60 degrees. Finally, statistical study was performed for prediction of mechanical behaviors and printing time of products.
Açıklama
Anahtar Kelimeler
FDM, mechanical behaviors, printing time, Taguchi, Design, Parts, Strength
Kaynak
Journal Of The Chinese Society Of Mechanical Engineers
WoS Q Değeri
Q4
Scopus Q Değeri
Cilt
42
Sayı
4
