COMPARATIVE ANALYSIS OF HATCH COVER STOCKING GANTRY CRANE HOOKS MANUFACTURED FROM ST37 AND WELDOX700 STEELS UNDER STATIC LOADING CONDITIONS

Basit Öğe Kaydı
dc.contributor.authorŞengül, Ömer
dc.contributor.authorKam, Menderes
dc.date.accessioned2023-07-26T11:58:22Z
dc.date.available2023-07-26T11:58:22Z
dc.date.issued2022
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.departmentDÜ, Cumayeri Meslek Yüksekokulu, Makine ve Metal Teknolojileri Bölümüen_US
dc.description.abstractCrane hooks are used to ensure the safe transportation of loads to be lifted in load lifting and handling systems. In this study, special hooks for cranes designed to open and close the doors of warehouse zones used for ship cargo and cargo transport, and their responses under 60,000 N static loading conditions are numerically and experimentally analyzed. In the experimental study, ST37 structural steel and Weldox700 high-strength steel were used to manufacture the hook. Experimental data collected under static loading conditions of the component was measured via strain gauges sensors. It was concluded that the results of structural numerical analysis with the Finite Element Method (FEM) using ANSYS 2019 R3 analysis program with experimental data are in harmony with the results of experimental measurements. In addition, the maximum values of stress of the hook manufactured with Weldox700 and ST37 steels under the stress static loading conditions are obtained as 60 MPa and 57.3 MPa, respectively. In the numerical analysis results, stress value was obtained as 61.21 MPa. Compared to the analysis results based on experiments and FEM, numerical analysis results showed that fudge factors in ST37 and Weldox700 steels are 1.8% and 6%, respectively. This result confirms that experimental and mathematical data were in harmony with each other and reliable.en_US
dc.description.sponsorship[2020.22.01.1124]en_US
dc.description.sponsorshipThe authors would like to acknowledge the support of Scientific Research Projects Coordination of theDuzce University for the Project entitled 2020.22.01.1124.en_US
dc.identifier.doi10.1142/S0218625X22500615
dc.identifier.issn0218-625X
dc.identifier.issn1793-6667
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85127081211en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://doi.org/10.1142/S0218625X22500615
dc.identifier.urihttps://hdl.handle.net/20.500.12684/13470
dc.identifier.volume29en_US
dc.identifier.wosWOS:000799245700008en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorŞengül, Ömer
dc.institutionauthorKam, Menderes
dc.language.isoenen_US
dc.publisherWorld Scientific Publ Co Pte Ltden_US
dc.relation.ispartofSurface Review and Lettersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.snmz$2023V1Guncelleme$en_US
dc.subjectSt37 Steel; Weldox700 Steel; Crane Hook; Hatch Covers; Fem; Strain Gaugesen_US
dc.subjectStrain; Resistance; Angleen_US
dc.titleCOMPARATIVE ANALYSIS OF HATCH COVER STOCKING GANTRY CRANE HOOKS MANUFACTURED FROM ST37 AND WELDOX700 STEELS UNDER STATIC LOADING CONDITIONSen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu