Investigation Of Electroerosion Machining Performance Of Metal Matrix Composite Materials Produced Using Stir And Indirect Squeeze Method

Basit Öğe Kaydı
dc.authoridNAS, Engin/0000-0002-4828-9240en_US
dc.authorscopusid58753296000en_US
dc.authorscopusid56741121800en_US
dc.authorscopusid14832541900en_US
dc.authorwosidUĞUR, Abdullah/ACB-8462-2022en_US
dc.authorwosidNAS, Engin/V-8276-2017en_US
dc.contributor.authorUgur, Abdullah
dc.contributor.authorNas, Engin
dc.contributor.authorGokkaya, Hasan
dc.date.accessioned2024-08-23T16:04:14Z
dc.date.available2024-08-23T16:04:14Z
dc.date.issued2023en_US
dc.departmentDüzce Üniversitesien_US
dc.description.abstractIn this study, metal matrix composite (MMC) materials were made with an aluminum matrix (AA7075 alloy) and reinforcement silicon carbide (SiC) elements using molten metal stir and indirect squeeze casting. SiC was used as a reinforcing element in the making of MMC material in different amounts (10%, 14%, and 18%) by mass. Electro Discharge Machining (EDM), cut depth (0.5 mm), three different pulse-on times, three different discharge current values, and a fixed pulse-off time (20 s) were used to machine MMC materials. The effects of machining parameters on machining time, average surface roughness, hole diameter, and material wear difference after machining were studied. As a result of the study, the composite material with 75 mu s pulse-on time, 6A current value, and 10% reinforcement element had the lowest machining time, the largest hole diameter, and the smoothest average surface. These machining parameters and materials also had the shortest machining time (5 min). Based on the signal-to-noise ratios, the best parameters for average surface roughness, hole diameter, Processing time, and material wear amount (MMC, discharge current value, and impact time) were found to be L2L1L1, L3L1L1, L1L3L3, and L1L1L2, respectively. Based on the ANOVA results, the R2 values for the average surface roughness, hole diameter, machining time, and material wear loss value were 99.3%, 98.7%, 77.8%, and 97.3%, respectively.en_US
dc.description.sponsorshipKarabuk University Rectorate and Scientific Research Projects (BAP) Management Coordinators [KBU-BAP-15/1-DR-027]en_US
dc.description.sponsorshipThe authors would like to thank Karabuk University Rectorate and Scientific Research Projects (BAP) Management Coordinators for their financial support within the scope of KBU-BAP-15/1-DR-027.en_US
dc.identifier.doi10.1142/S0218625X24500513
dc.identifier.issn0218-625X
dc.identifier.issn1793-6667
dc.identifier.scopus2-s2.0-85179090780en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://doi.org/10.1142/S0218625X24500513
dc.identifier.urihttps://hdl.handle.net/20.500.12684/14108
dc.identifier.wosWOS:001119440700001en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWorld Scientific Publ Co Pte Ltden_US
dc.relation.ispartofSurface Review And Lettersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMetal matrix compositesen_US
dc.subjectmachinabilityen_US
dc.subjectelectroerosion machineen_US
dc.subjectTaguchien_US
dc.subjectANOVAen_US
dc.subjectSurface-Roughnessen_US
dc.subjectMechanical-Propertiesen_US
dc.subjectStrengthening Mechanismsen_US
dc.subjectTaguchi Methoden_US
dc.subjectCasten_US
dc.subjectOptimizationen_US
dc.subjectParticleen_US
dc.subjectAlloyen_US
dc.subjectMicrostructureen_US
dc.subjectBehavioren_US
dc.titleInvestigation Of Electroerosion Machining Performance Of Metal Matrix Composite Materials Produced Using Stir And Indirect Squeeze Methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu