Analysis and Optimization of Cutting Tool Coating Effects on Surface Roughness and Cutting Forces on Turning of AA 6061 Alloy

Basit Öğe Kaydı
dc.authoridAkgün, Mahir/0000-0002-4522-066X
dc.authoridKARA, Fuat/0000-0002-3811-3081
dc.authorwosidAkgün, Mahir/AAJ-9504-2020
dc.contributor.authorAkgün, Mahir
dc.contributor.authorKara, Fuat
dc.date.accessioned2023-07-26T11:58:22Z
dc.date.available2023-07-26T11:58:22Z
dc.date.issued2021
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractThe present work has been focused on cutting force (Fc) and analysis of machined surface in turning of AA 6061 alloy with uncoated and PVD-TiB2 coated cutting inserts. Turning tests have been conducted on a CNC turning under dry cutting conditions based on Taguchi L-18 (2(1) x 3(3)) array. Kistler 9257A type dynamometer and equipment have been used in measuring the main cutting force (Fc) in turning experiments. Analysis of variance (ANOVA) has been applied to define the effect levels of the turning parameters on Fc and Ra. Moreover, the mathematical models for Fc and Ra have been developed via linear and quadratic regression models. The results indicated that the best performance in terms of Fc and Ra was obtained at an uncoated insert, cutting speed of 350 m/min, feed rate of 0.1 mm/rev, and depth of cut of 1 mm. Moreover, the feed rate is the most influential parameter on Ra and Fc, with 64.28% and 54.9%, respectively. The developed mathematical models for cutting force (Fc) and surface roughness (Ra) present reliable results with coefficients of determination (R-2) of 96.04% and 92.15%, respectively.en_US
dc.identifier.doi10.1155/2021/6498261
dc.identifier.issn1687-8434
dc.identifier.issn1687-8442
dc.identifier.scopus2-s2.0-85120408409en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1155/2021/6498261
dc.identifier.urihttps://hdl.handle.net/20.500.12684/13473
dc.identifier.volume2021en_US
dc.identifier.wosWOS:000733411100002en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorKara, Fuat
dc.language.isoenen_US
dc.publisherHindawi Ltden_US
dc.relation.ispartofAdvances In Materials Science and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.snmz$2023V1Guncelleme$en_US
dc.subjectTaguchi Method; Flank Wear; Parameters; Machinabilityen_US
dc.titleAnalysis and Optimization of Cutting Tool Coating Effects on Surface Roughness and Cutting Forces on Turning of AA 6061 Alloyen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
13473.pdf
Boyut:
10.46 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu