Investigation of deep drawing of square cups using high-strength DP600 and DP800 sheets

Basit Öğe Kaydı
dc.contributor.authorŞen, Nuri
dc.contributor.authorTaşdemir, Vedat
dc.contributor.authorÇolakoğlu, İsa
dc.date.accessioned2023-07-26T11:55:14Z
dc.date.available2023-07-26T11:55:14Z
dc.date.issued2021
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractThis study investigated the deep drawing of square cups using high-strength du-al phase DP600 and DP800 sheets via both experimental and finite element meth-ods. The limiting drawing ratio (LDR) and wall thickness distribution were exam-ined. The initial thickness of the materials used in the study was equal to 1-mm. The experiments were carried out at room temperature using both Teflon film and graphite spray lubricants at the same time. In terms of LDR, both experimental and numerical results corresponded with each other. A ratio of 1.97 LDR was reached for the DP600 steel and 1.92 LDR for the DP800. Given that the thick-ness distribution between the experimental and numerical results, an accord of over 90% was noticed. For the DP600 steel, the lowest experimental thickness value was 0.864 mm and the lowest numerical value was 0.87 mm. For the DP800 steel, the lowest experimental thickness value was measured to be 0.89 mm while the lowest numerical value was found to be 0.88 mm. In the conclusion, the pre-sent paper proves that the experimental results in the deep drawing of square cups can be achieved with very satisfying results by using numerical methods.en_US
dc.identifier.doi10.30939/ijastech..995381
dc.identifier.endpage385en_US
dc.identifier.issn2587-0963
dc.identifier.issue4en_US
dc.identifier.startpage378en_US
dc.identifier.trdizinid503118en_US
dc.identifier.urihttp://doi.org/10.30939/ijastech..995381
dc.identifier.urihttps://search.trdizin.gov.tr/yayin/detay/503118
dc.identifier.urihttps://hdl.handle.net/20.500.12684/13030
dc.identifier.volume5en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.institutionauthorŞen, Nuri
dc.language.isoenen_US
dc.relation.ispartofInternational Journal of Automotive Science and Technologyen_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.snmz$2023V1Guncelleme$en_US
dc.subjectHigh-strength steelen_US
dc.titleInvestigation of deep drawing of square cups using high-strength DP600 and DP800 sheetsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
13030.pdf
Boyut:
925.44 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu