Producing particleboards from hazelnut (corylusavellana L.) husk and European Black Pine (Pinus nigra Arnold)
Yükleniyor...
Dosyalar
Tarih
2009
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
This research was conducted to investigate the suitability of utilizing hazelnut (Cory/us avellana L.) husk along with European Black Pine (Pinus nigra Arnold) chips to produce general purpose particleboards. Panels with a target density of 0.70 g/cm3 were manufactured using 0,10, 20,30,40,50 and 100 % husk in the mixture. Urea-formaldehyde (UF) was the adhesive utilized in the production. Produced panels were tested for certain mechanical and physical properties. Experimental results indicated that increase in husk percentage in the mixture generally diminished the mechanical and physical properties; however, the test results showed that husks could be utilized up to 30% in the mixture to produce particleboards while maintaining the minimum values required in the Standard (TS-EN 312).
Açıklama
Anahtar Kelimeler
Cory/us avellana; European black pine (pinus nigra); Hazelnut husk; Mechanical properties; Particleboard; Physical properties
Kaynak
Wood Research
WoS Q Değeri
Scopus Q Değeri
Q2
Cilt
54
Sayı
1
