Multi-Objective Optimization of Process Parameters in Milling of 17-4 PH Stainless Steel using Taguchi-based Gray Relational Analysis

Simple item page
dc.authorscopusid36644031300en_US
dc.authorscopusid58753271300en_US
dc.authorscopusid14631566200en_US
dc.authorscopusid35345218800en_US
dc.contributor.authorKara, F.
dc.contributor.authorBulan, N.
dc.contributor.authorAkgün, M.
dc.contributor.authorKöklü, U.
dc.date.accessioned2024-08-23T16:07:28Z
dc.date.available2024-08-23T16:07:28Z
dc.date.issued2023en_US
dc.departmentDüzce Üniversitesien_US
dc.description.abstractThe present study investigates the effects of cutting parameters and the variation of nose radius on cutting force, surface roughness, cutting temperature, and tool wear in the milling 17-4 PH stainless steel. The milling experiments were carried out using the Taguchi L18 experimental design with two different types of cutting nose radius (0.4 and 0.8), three different cutting speeds (70, 140 and 210 m/min), three different feed rates (0.06, 0.09 and 0.12 mm/tooth), and a constant cutting depth (1 mm). The outcomes of this study show that the cutting force, cutting temperature, and tool wear values are average 2.35, 28.89 and 1.18% lower when 17-4 PH stainless steel is machined with a 0.4 mm cutting nose radius compared to those in a 0.8 mm cutting nose radius. The surface quality is also improved by average 47.48% with an increase in the cutting tool nose radius. According to the multi response optimization results, the optimal levels of milling parameters for multiple output parameters are determined as 0.8 mm cutting nose radius, 70 m/min cutting speed and 0.06 mm/tooth, respectively. © National Research University Higher School of Economics. All rights reserved.en_US
dc.identifier.doi10.30919/es961
dc.identifier.issn2576-988X
dc.identifier.scopus2-s2.0-85179029890en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.urihttps://doi.org/10.30919/es961
dc.identifier.urihttps://hdl.handle.net/20.500.12684/14666
dc.identifier.volume26en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherEngineered Science Publisheren_US
dc.relation.ispartofEngineered Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subject17-4 PH stainless steelen_US
dc.subjectGrey relational analysisen_US
dc.subjectOptimizationen_US
dc.subjectMachiningen_US
dc.subjectMillingen_US
dc.titleMulti-Objective Optimization of Process Parameters in Milling of 17-4 PH Stainless Steel using Taguchi-based Gray Relational Analysisen_US
dc.typeArticleen_US

Files

Collections

Scopus İndeksli Yayınlar Koleksiyonu

We collect and process your personal information for the following purposes: Authentication, Preferences, Acknowledgement and Statistics.
To learn more, please read our privacy policy.

Customize