Evaluation of Cutting Temperature and Optimization in Milling of GGG60 Cast Iron

Basit Öğe Kaydı
dc.contributor.authorDüzce, Raşit
dc.contributor.authorSamtaş, Gürcan
dc.date.accessioned2024-08-23T16:07:51Z
dc.date.available2024-08-23T16:07:51Z
dc.date.issued2024en_US
dc.departmentDüzce Üniversitesien_US
dc.description.abstractSpheroidal graphite cast irons have increased ductility, tensile strength, and toughness compared to other cast irons. Additionally, it can be mentioned that choosing spheroidal graphite cast iron over steel material has a better machining feature. In this study, Face milling operations were carried out using GGG60 material and different inserts, feed, and depth of cut. The Taguchi method was used for the experimental design, and 27 experiments were carried out. During the experiments, a thermal camera measured the temperature from the cutting zone. Experimental results were evaluated with analysis of variance and graphics, and cutting parameters were optimized. As a result of the optimization, optimum parameters for minimum temperature, TiAlN coated insert, 300 m/min cutting speed, 0.30 mm/tooth feed rate, and 0.5 mm depth of cut were found. According to the results obtained from the study, the most influential parameter affecting the temperature was the cutting speed. In addition, the TiAlN-coated insert has been observed as the most suitable coating type for minimum temperature.en_US
dc.identifier.doi10.38088/jise.1195520
dc.identifier.endpage77en_US
dc.identifier.issn2602-4217
dc.identifier.issue1en_US
dc.identifier.startpage63en_US
dc.identifier.trdizinid1241031en_US
dc.identifier.urihttps://doi.org/10.38088/jise.1195520
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1241031
dc.identifier.urihttps://hdl.handle.net/20.500.12684/14900
dc.identifier.volume8en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isoenen_US
dc.relation.ispartofJournal of Innovative Science and Engineering (JISE)en_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleEvaluation of Cutting Temperature and Optimization in Milling of GGG60 Cast Ironen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
14900.pdf
Boyut:
844.7 KB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu