The Use of Solanum Nigrum Fruit Extract as Colourant in Wood Material

Yükleniyor...
Küçük Resim

Tarih

2019

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Düzce Üniversitesi

Erişim Hakkı

info:eu-repo/semantics/openAccess

Özet

this study, the color properties of scotch pine (Pinus sylvestris L.) and Eastern beech (Fagus oriantalis L.) wood samples treated with solutions prepared in different concentrations from Solanum nigrum (TU) fruit were investigated. The liquid obtained by mechanical means from the TU fruit was mixed with pure water at a concentration of 20%, 40% and 70%. Then, ferrous sulphate, copper sulphate and aluminium sulphate were added to the mixture as mordant (binder) to give the dyestuff solution. The wood materials were then impregnated with the prepared solutions according to the immersion method. The color change in the samples was evaluated according to CIEL*a*b* color coordinate system. According to the results, L*, a* and b* color values of the samples after the impregnation processes decreased due to the increase in the solution concentration. Compared to the control (untreated) samples, the samples were darkened and also the tendency of the green and blue color of the samples increased. On the other hand, the color values of the samples affected mordant agents. In particular, in the samples where ferrous sulphate-doped solutions were applied, the a* value was significantly reduced and the green color tendency in these samples increased significantly. In addition, the total color change (ΔE*) was higher in scotch pine samples than in Eastern beech.
Bu çalışmada, tilki üzümü (TÜ) meyvesinden farklı konsantrasyonlarda hazırlanan çözeltiler ile muamele edilmiş sarıçam (Pinus sylvestris L.) ve Doğu kayını (Fagus oriantalis L.) odunu örneklerinin renk özellikleri (L*, a*, b* ve ΔE) incelenmiştir. TÜ meyvesinden mekanik yöntemle elde edilen sıvı %20, %40 ve %70 konsantrasyonda olacak şekilde saf su ile karıştırılmıştır. Daha sonra bu karışımların içerisine mordan (bağlayıcı) olarak demir sülfat, bakır sülfat ve alüminyum sülfat eklenerek boyar çözelti elde edilmiştir. Ardından ağaç malzemeler, hazırlanan çözeltiler ile daldırma yöntemine göre emprenye edilmiştir. Örneklerdeki renk değişimi CIEL*a*b* renk koordinat sistemine göre değerlendirilmiştir. Çalışma sonuçlarına göre, emprenye işlemleri sonrası örneklerin L*, a* ve b* renk değerleri çözelti konsantrasyonundaki artışa da bağlı olarak azalmıştır. Kontrol (işlemsiz) örneklerle karşılaştırıldığında, örnekler koyulaşmış ve aynı zamanda örneklerin yeşil ve mavi renk eğilimi artmıştır. Diğer taraftan, örneklerin renk değerlerini mordan maddeleri etkilemiştir. Özellikle demir sülfat katkılı çözeltilerin uygulandığı örneklerde a* değeri önemli derecede azalmış ve bu örneklerde yeşil renk eğilimi büyük oranda artış göstermiştir. Ayrıca, toplam renk değişimi (ΔE*), Doğu kayınına göre sarıçam örneklerde daha yüksek değerlerde gerçekleşmiştir.

Açıklama

Anahtar Kelimeler

Wood material, Color change, Solanum nigrum, Ağaç malzeme, Renk değişimi, Tilki üzümü

Kaynak

3rd International Engineering Research Symposium

WoS Q Değeri

Scopus Q Değeri

Cilt

Sayı

Künye