INVESTIGATION THE EFFECTS OF 3D PRINTER SYSTEM VIBRATIONS ON MECHANICAL PROPERTIES OF THE PRINTED PRODUCTS

Basit Öğe Kaydı
dc.contributor.authorKam, Menderes
dc.contributor.authorSaruhan, Hamit
dc.contributor.authorİpekçi, Ahmet
dc.date.accessioned2020-04-30T23:18:43Z
dc.date.available2020-04-30T23:18:43Z
dc.date.issued2018
dc.departmentDÜ, Cumayeri Meslek Yüksekokulu, Makine ve Metal Teknolojileri Bölümüen_US
dc.descriptionWOS: 000445810300006en_US
dc.description.abstractIn recent years, three-dimensional (3D) printing is attracting widespread interest due to functional rapid prototyping and products by reducing the time and material involved in process. Most of 3D printer users focus on mechanical properties of products neglecting vibration characteristics of printer system effects on products. The aim of this study is to investigate the effects of 3D printer system vibrations on mechanical properties of printed products. Fused Deposition Modeling (FDM) technology which is one of most used additive manufacturing process was used to print test samples and Polyethyletherphthalate Glycol (PET-G) was used as material for printing. Vibration measurements were taking for eighteen printed test samples. Vibrations data were measured from 3D printer movement in three axes (x, y, and z) by accelerometers. The processing parameters were selected as occupancy rate, filling structures orientation, and processing speed. The samples in rectilinear filling structure with occupancy rate of 50 % having different orientations (45 degrees by 45 degrees and 60 degrees by 30 degrees) and processing speeds (3600, 3900, and 4200 mm/min). Tensile test was used to test mechanical properties of test samples. The findings have shown that induced vibration has significant impact on mechanical properties which can be used to control the mechanical properties in terms of tensile stress and elongation of printed products during mass printing. Results showed that vibration amplitude values for orientations of 60 degrees by 30 degrees and processing speed 3600 mm/min are much lower compared to the other test samples. While tensile strength increases about % 5 when orientation is 45 degrees by 45 degrees with 3600 mm/min processing speed. From result obtained, it can be said that orientation of the product has a significant effect on the response of the printer system in terms of vibrations.en_US
dc.identifier.endpage666en_US
dc.identifier.issn1304-7205
dc.identifier.issn1304-7191
dc.identifier.issue3en_US
dc.identifier.startpage655en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12684/3496
dc.identifier.volume36en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherYildiz Technical Univen_US
dc.relation.ispartofSigma Journal Of Engineering And Natural Sciences-Sigma Muhendislik Ve Fen Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subject3D printeren_US
dc.subjectvibrationen_US
dc.subjectmechanical propertiesen_US
dc.subjectPET-Gen_US
dc.titleINVESTIGATION THE EFFECTS OF 3D PRINTER SYSTEM VIBRATIONS ON MECHANICAL PROPERTIES OF THE PRINTED PRODUCTSen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
3496.pdf
Boyut:
992.82 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu