The Effect of Fiberboard Modification on Adhesion Strength to Polyvinyl Chloride (PVC) Sheets or Eastern Beech (Fagus orientalis L.) Veneers

Basit Öğe Kaydı
dc.contributor.authorKara, Adem
dc.contributor.authorBudakçı, Mehmet
dc.contributor.authorÇamlıbel, Osman
dc.date.accessioned2020-04-30T23:32:56Z
dc.date.available2020-04-30T23:32:56Z
dc.date.issued2018
dc.departmentDÜ, Teknoloji Fakültesi, Ağaç İşleri Endüstri Mühendisliği Bölümüen_US
dc.descriptionWOS: 000454215100082en_US
dc.description.abstractThe adhesion strength was evaluated for polyvinyl chloride (PVC) and Eastern beech (Fagus orientalis L.) veneers glued onto specially produced fiberboards using urea-formaldehyde (UF), polyvinyl acetate (PVAc), and polyurethane (PU) adhesives. Inorganic fillers including rock salt (NaCI), calcite (CaCO3), borax pentahydrate (Na(2)B(4)4O(7)center dot 5H(2)O), or talc (3MgO center dot 4SiO(2)center dot H2O) were incorporated into the fiberboards at levels of 3%, 6%, and 9%. The adhesion strength of the samples was determined in accordance to Turkish Standard TS EN 311 (2005). Scanning electron microscopy (SEM) was employed to determine the structural morphology at the bonding interface of the veneers and the modified fiberboards. The results of this study indicated that veneer adhesion strength was reduced by the addition of inorganic fillers to the fiberboard. The highest adhesion strength was obtained with Eastern beech veneer that was glued using UF adhesive on the control samples without inorganic fillers. It was concluded that UF and PVAc adhesives are not suitable for bonding PVC veneers onto fiberboard surfaces.en_US
dc.description.sponsorshipDuzce University Research FundDuzce University [BAP-2017.07.01.598]en_US
dc.description.sponsorshipThe authors are grateful for the support of the Duzce University Research Fund (Grant No. BAP-2017.07.01.598).en_US
dc.identifier.doi10.15376/biores.13.4.8295-8309en_US
dc.identifier.endpage8309en_US
dc.identifier.issn1930-2126
dc.identifier.issue4en_US
dc.identifier.startpage8295en_US
dc.identifier.urihttps://doi.org/10.15376/biores.13.4.8295-8309
dc.identifier.urihttps://hdl.handle.net/20.500.12684/4855
dc.identifier.volume13en_US
dc.identifier.wosWOS:000454215100082en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectMedium-density fiberboard (MDF)en_US
dc.subjectInorganic fillersen_US
dc.subjectPolyvinyl chloride (PVC)en_US
dc.subjectWood veneeren_US
dc.subjectWood adhesivesen_US
dc.titleThe Effect of Fiberboard Modification on Adhesion Strength to Polyvinyl Chloride (PVC) Sheets or Eastern Beech (Fagus orientalis L.) Veneersen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
4855.pdf
Boyut:
1.22 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu