Çok boyutlu yazıcılardan baskısı farklı parametrelerle alınan numunelerin malzeme seçiminin deneysel analizi
Yükleniyor...
Dosyalar
Tarih
2021
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
With the rapid development of technology, 3D (three-dimensional) printing technologies also take their place in our daily lives as a part of this development in terms of printing material or spare parts variety, software and application. As a result of current developments, FDM (fused accumulation modeling) technology, which is more accessible due to its lower costs, is becoming widespread as a first example and hobby. In this study, using the FDM method, which is one of the 3D printing technologies, the mechanical properties of the samples printed with different filling ratios with ABS (acrylonitrile butadiene styrene) and PLA (polylactic acid), which are the most common materials to use, were experimentally investigated. Various suggestions are presented regarding the usability of the prints obtained with 3D printing technology according to the material types. In this context; It was concluded that PLA material provides higher tensile strength compared to ABS material, and ABS material has lower flexural strength compared to PLA material.
Açıklama
Anahtar Kelimeler
3D printing, Manufacturing, Manufacturing parameters, Material 3B yazdırma, İmalat, İmalat parametreleri, Malzeme
Kaynak
Gümüşhane Üniversitesi Fen Bilimleri Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
11
Sayı
3
