THE EFFECTS OF FORMWORK SURFACE PROPERTIES ON CONCRETE CARBONATION

Basit Öğe Kaydı
dc.contributor.authorSubaşı, Serkan
dc.contributor.authorArslan, Metin
dc.date.accessioned2020-04-30T23:33:22Z
dc.date.available2020-04-30T23:33:22Z
dc.date.issued2008
dc.departmentDÜ, Teknik Eğitim Fakültesi, Yapı Eğitimi Bölümüen_US
dc.descriptionWOS: 000273014200020en_US
dc.description.abstractThe aim of this study is to investigate the effects of formwork surface properties on concrete carbonation. Seven concrete wall formworks with different surface properties, Scotch pine, Black poplar, sheet iron and four plywoods, were constructed in this study. Tree out of four wall plywood formworks were prepared with drainage channels and holes. The formwork surfaces consisting of drainage channels and holes were covered with different geotextile liners. The concrete were casted into all prepared wall formworks, which were removed after 28 days that the sample blocks were prepared. The blocks were kept under atmospheric conditions for six years. After that, the depths of carbonation were determined using the taken core samples of all blocks. In addition, the pH values were investigated on the concrete powder samples that were obtained from different depth levels of the concrete blocks. The results indicated that formworks including both drainage and liners gave lower carbonation compared to the other formworks. The lowest carbonation was observed with the formwork that was covered with SB-20 geotextile. On the other hand, the highest carbonation was found with the sheet iron formwork.en_US
dc.identifier.endpage921en_US
dc.identifier.issn1300-1884
dc.identifier.issue4en_US
dc.identifier.startpage913en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12684/4954
dc.identifier.volume23en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isotren_US
dc.publisherGazi Univ, Fac Engineering Architectureen_US
dc.relation.ispartofJournal Of The Faculty Of Engineering And Architecture Of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectformwork surfaceen_US
dc.subjectcarbonationen_US
dc.subjectpHen_US
dc.subjectconcreteen_US
dc.titleTHE EFFECTS OF FORMWORK SURFACE PROPERTIES ON CONCRETE CARBONATIONen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu