The Potential of Using Forest Waste as a Raw Material in Particleboard Manufacturing

Basit Öğe Kaydı
dc.contributor.authorSahin, Halil Ibrahim
dc.date.accessioned2021-12-01T18:47:29Z
dc.date.available2021-12-01T18:47:29Z
dc.date.issued2020
dc.department[Belirlenecek]en_US
dc.description.abstractWood particles and a mixture of forest waste were investigated as raw material for the particleboard industry. Urea formaldehyde resin was used as the adhesive in the production of the particleboards. Some chemical (pH, dilute alkali solubility, hot and cold water solubility), physical (density, moisture, thickness swelling, and water absorption), mechanical (modulus of rupture, modulus of elasticity, internal bond strength, and screw holding strength) properties, as well as the contact angle values of the resulting particleboards were determined. Due to its needle litter and cone content, the forest waste exhibited a lower pH value and a higher content of extractive material than wood. Increasing the addition of forest waste led to significant reductions in the physical and mechanical properties of the particleboards. The addition of forest waste reduced the internal bond strength the most (56.6%), whereas the least reduction (15.7%) was in the value of screw holding strength perpendicular to the surface. The values of all panels except panel type F exceeded the minimum modulus of elasticity (1600 N mm-2) required for furniture production according to the EN 312-P2 standard. Results of the analyses showed that forest waste (10% and 20%) is a suitable renewable raw material source for panel production.en_US
dc.identifier.doi10.15376/biores.15.4.7780-7795
dc.identifier.endpage7795en_US
dc.identifier.issn1930-2126
dc.identifier.issue4en_US
dc.identifier.startpage7780en_US
dc.identifier.urihttps://doi.org/10.15376/biores.15.4.7780-7795
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10287
dc.identifier.volume15en_US
dc.identifier.wosWOS:000583802900036en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.institutionauthorSahin, Halil Ibrahim
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectContact angleen_US
dc.subjectForest wasteen_US
dc.subjectWood particlesen_US
dc.subjectParticleboarden_US
dc.subjectUrea formaldehydeen_US
dc.subjectHelianthus-Annuus L.en_US
dc.subjectMechanical-Propertiesen_US
dc.subjectFormaldehyde Emissionen_US
dc.subjectTermite Resistanceen_US
dc.subjectSurface-Roughnessen_US
dc.subjectNeedle Litteren_US
dc.subjectWooden_US
dc.subjectStalksen_US
dc.subjectWettabilityen_US
dc.subjectCompositesen_US
dc.titleThe Potential of Using Forest Waste as a Raw Material in Particleboard Manufacturingen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
Ä°sim:
10287.pdf
Boyut:
580.03 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
Ä°ndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu