Surface Roughness of Thermally Treated Wood Cut with Different Parameters in CNC Router Machine

Basit Öğe Kaydı
dc.contributor.authorPelit, Huseyin
dc.contributor.authorKorkmaz, Mustafa
dc.contributor.authorBudakci, Mehmet
dc.date.accessioned2021-12-01T18:46:53Z
dc.date.available2021-12-01T18:46:53Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractThe effects of different machining parameters on surface roughness values of thermally treated pine, beech, and linden woods cut in a computer numerical control (CNC) router machine were examined. Wood specimens were thermally treated at 170, 190, and 210 degrees C for 2 h. Then, specimens were cut in the radial and tangential directions with three different spindle speeds (12000, 15000, and 18000 rpm) and three different feed rates (3000, 4000, and 6000 mm/min) using two different end mill tools (spiral and straight) on the CNC machine. The end mill type significantly affected the roughness values of the untreated and thermally treated specimens in both directions. Lower roughness values were found in the specimens (especially pine) machined with the straight end mill compared to those machined with the spiral end mill. Roughness generally decreased in the thermally treated specimens. However, thermal treatment temperature did not have a notable effect on roughness. As the spindle speed increased, the roughness values of all specimens decreased. In contrast, as the feed rate increased, the roughness values increased. Therefore, the end mill type, feed rate, and spindle speed were the most influential parameters on the roughness.en_US
dc.description.sponsorshipResearch Fund of Duzce UniversityDuzce University [BAP-2018.07.01.742]en_US
dc.description.sponsorshipThe authors are grateful for the support of the Research Fund of Duzce University, Grant No. BAP-2018.07.01.742.en_US
dc.identifier.doi10.15376/biores.16.3.5133-5147
dc.identifier.endpage5147en_US
dc.identifier.issn1930-2126
dc.identifier.issue3en_US
dc.identifier.startpage5133en_US
dc.identifier.urihttps://doi.org/10.15376/biores.16.3.5133-5147
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10036
dc.identifier.volume16en_US
dc.identifier.wosWOS:000688342600025en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCNC cuttingen_US
dc.subjectProcessing parameteren_US
dc.subjectRoughnessen_US
dc.subjectThermal treatmenten_US
dc.subjectWood materialen_US
dc.subjectMechanical-Propertiesen_US
dc.subjectHeat-Treatmenten_US
dc.subjectDensityen_US
dc.subjectQualityen_US
dc.subjectMdfen_US
dc.titleSurface Roughness of Thermally Treated Wood Cut with Different Parameters in CNC Router Machineen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
Ä°sim:
10009.pdf
Boyut:
626.31 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
Ä°ndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu