Investigation of weldability of powder metal plates by friction stir welding

Basit Öğe Kaydı
dc.contributor.authorAteş, Hakan
dc.contributor.authorKurt, Adem
dc.contributor.authorÇakır, Mustafa
dc.contributor.authorUygur, İlyas
dc.date.accessioned2020-04-30T13:32:40Z
dc.date.available2020-04-30T13:32:40Z
dc.date.issued2008
dc.departmentDÜ, Teknik Eğitim Fakültesi, Makine Eğitimi Bölümüen_US
dc.descriptionMetal Powder Industries Federation (MPIF)en_US
dc.description2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008 -- 8 June 2008 through 12 June 2008 -- Washington, DC -- 98742en_US
dc.description.abstractPowder metallurgy is one of the most common methods for fabricating many engineering components. However, one of the major difficulties for these materials is joining techniques. In this study, Aluminium powders produced by atomization method have been pressed with the pressure 370 MPa. They have been sintered under argon atmosphere in periods of 60 minutes at 600 °C afterwards. The dimension of Al plates were 5×45×55mm. Three tool rotation speeds (700, 900, 1100 and 1400rpm) in the clockwise direction were chosen and specimens were joined by friction stir welding (FSW) technique. The hardness values of welded specimens were evaluated and three point bending tests were performed. Also macro and microstructures were investigated for the tested materials. The optimum welding properties were obtained with 900 rpm tool rotation speed.© 2008 Metal Powder Industries Federation.en_US
dc.identifier.endpage6209en_US
dc.identifier.isbn0979348897; 9780979348891
dc.identifier.startpage6204en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12684/394
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofAdvances in Powder Metallurgy and Particulate Materials - 2008, Proceedings of the 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAl; Friction stir welding; Microstructure.; Powder metallurgy; Weldabilityen_US
dc.titleInvestigation of weldability of powder metal plates by friction stir weldingen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Bildiri Koleksiyonu