Taguchi optimization of surface roughness in grinding of cryogenically treated AISI 5140 steel

Basit Öğe Kaydı
dc.authoridKoklu, Ugur/0000-0002-9205-9768
dc.authorwosidKoklu, Ugur/AAQ-1387-2020
dc.contributor.authorKara, Fuat
dc.contributor.authorKoklu, Ugur
dc.contributor.authorKabasakaloglu, Ufuk
dc.date.accessioned2021-12-01T18:47:39Z
dc.date.available2021-12-01T18:47:39Z
dc.date.issued2020
dc.department[Belirlenecek]en_US
dc.description.abstractThis study investigated the performance of the grinding parameters used in the cylindrical grinding process of AISI 5140 steel and identified optimum grinding conditions via the Taguchi optimization method. Experiments were carried out via the L-18 orthogonal array. Control factors for optimum surface roughness (Ra) values were determined by using the Taguchi method. Two different grinding wheels (SiC and Al2O3), three different cryogenic samples (CHT, DCTT-15 and DCTT-30) and depth of cuts (100, 200 and 300 mu m) were selected as control factors. The cylindrical grinding test results showed that optimal Ra values were obtained on specimens cryogenically treated for 30 h (DCTT-30). Linear and quadratic regression analyses were conducted for the experimental results. The correlation coefficients (R-2) were found to be 0.957 and 0.993 with linear and quadratic regression models, respectively. Finally, confirmation tests were performed and showed that the optimization had been successfully implemented.en_US
dc.description.sponsorshipKaramanoglu Mehmetbey University Scientific Research Project DivisionKaramanoglu Mehmetbey University [13-M-13]en_US
dc.description.sponsorshipThe work was supported by the Karamanoglu Mehmetbey University Scientific Research Project Division (Grant No. 13-M-13).en_US
dc.identifier.doi10.3139/120.111583
dc.identifier.endpage1047en_US
dc.identifier.issn0025-5300
dc.identifier.issue10en_US
dc.identifier.startpage1041en_US
dc.identifier.urihttps://doi.org/10.3139/120.111583
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10338
dc.identifier.volume62en_US
dc.identifier.wosWOS:000580591700011en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCryogenic treatmenten_US
dc.subjectcylindrical grindingen_US
dc.subjectregression analysesen_US
dc.subjectsurface roughnessen_US
dc.subjectTaguchi methoden_US
dc.subjectWear-Resistanceen_US
dc.subjectParametersen_US
dc.subjectBehavioren_US
dc.subjectPerformanceen_US
dc.subjectAlloyen_US
dc.titleTaguchi optimization of surface roughness in grinding of cryogenically treated AISI 5140 steelen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
Ä°sim:
10338.pdf
Boyut:
2.25 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
Ä°ndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu