Evaluation of the effect of the novolac resin ratio on the high temperature performance of the brake pads

Basit Öğe Kaydı
dc.contributor.authorAkıncıoğlu, Gülşah
dc.date.accessioned2025-03-24T19:48:15Z
dc.date.available2025-03-24T19:48:15Z
dc.date.issued2022
dc.departmentDüzce Üniversitesi
dc.description.abstractThe resin is a widely used binder in the brake pads. Determining the optimum, resin ratio is important for the brake pad to show the best wear and braking performance. In this article, the impression of the novolac resin ratio (15% and 30%) on the perfor-mance of the brake pads at high temperatures was studied. Friction experiments of the brake pads were performed according to ASTM G99–95a test standard in Pin-on disc test device at 350 °C. The average friction coefficients obtained in the friction tests of 15% and 30% novolac resin samples at 500 rpm rotation speed, 350 ?C temperature, and 10 N load were 0.151 and 0.308, respectively. With the increase in the novolac res-in ratio, the hardness, density, and thermal conductivity of the brake pads have in-creased.
dc.identifier.doi10.30939/ijastech..1087420
dc.identifier.endpage201
dc.identifier.issn2587-0963
dc.identifier.issue2
dc.identifier.startpage196
dc.identifier.urihttps://doi.org/10.30939/ijastech..1087420
dc.identifier.urihttps://hdl.handle.net/20.500.12684/18801
dc.identifier.volume6
dc.language.isoen
dc.publisherOtomotiv Mühendisleri Derneği
dc.relation.ispartofInternational Journal of Automotive Science And Technology
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20250324
dc.subjectBrake Pad|Novolac Resin;|High Temperature|Friction Coefficient
dc.titleEvaluation of the effect of the novolac resin ratio on the high temperature performance of the brake pads
dc.typeArticle

Dosyalar

Koleksiyon

Öksüz Yayınlar Koleksiyonu