The effect of cutting paramaters on the hole quality and tool wear during the drilling of inconel 718

Basit Öğe Kaydı
dc.contributor.authorKıvak, Turgay
dc.contributor.authorHabalı, Kasım
dc.contributor.authorŞeker, Ulvi
dc.date.accessioned2020-04-30T13:33:32Z
dc.date.available2020-04-30T13:33:32Z
dc.date.issued2012
dc.departmentDÜ, Cumayeri Meslek Yüksekokulu, Makine ve Metal Teknolojileri Bölümüen_US
dc.description.abstractIn this study the effect of cutting parameters on the hole quality (circularity and hole diameter) and tool wear during the drilling of super alloy Inconel 718 with coated and uncoated carbide drills was investigated. Drilling tests were carried out with uncoated and TiN and TiAlN coated carbide drills of 5 mm diameter using a CNC vertical machining center under dry cutting conditions by drilling blind holes of 8 mm depth and employing four different cutting speeds (10, 12.5, 15, 17.5 m/min) and three different feed rates (0.05, 0.075, 0.1 mm/rev). Regarding hole diameters and the circularity measurements a comparison has been made in terms of the quality of the hole between cutting tools. It was observed that there was a decrease of tool performance and hole quality at high cutting speed and feed rate combinations. A serious increase in tool wear was observed when increasing cutting speed. The Utmost wear type was seen in the form of flank wear and chisel edge wear.en_US
dc.identifier.endpage540en_US
dc.identifier.issn1303-9709
dc.identifier.issue2en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage533en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12684/665
dc.identifier.volume25en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofGazi University Journal of Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectDrilling; Hole quality; Inconel 718; Tool wearen_US
dc.titleThe effect of cutting paramaters on the hole quality and tool wear during the drilling of inconel 718en_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
0665.pdf
Boyut:
568.07 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu