Optimisation of cutting parameters during the face milling of AA5083-H111 with coated and uncoated inserts using Taguchi method

Basit Öğe Kaydı
dc.contributor.authorSamtaş, Gürcan
dc.date.accessioned2020-04-30T13:33:00Z
dc.date.available2020-04-30T13:33:00Z
dc.date.issued2015
dc.departmentDÜ, Mühendislik Fakültesi, Mekatronik Mühendisliği Bölümüen_US
dc.description.abstractAluminium 5083-H111 alloy is used in many different sectors such as shipbuilding, rail cars and vehicle bodies. The use of this material in different sectors, its behaviours in the various machining operations have become important. In this study, face milling process was applied to AA5083-H111 material by using coated and uncoated cutting inserts. Experiments were performed on the basis of Taguchi's L18 orthogonal array (OA) at different levels of the cutting depth (0.08, 0.25 mm), the cutting inserts (uncoated carbide, PVD/TiA1N coated carbide, PVD/TiB2 coated carbide), the cutting speed (450, 550, 650 m/min) and the feed rate (0.08, 0.12, 0.25 mm/tooth) relating to a good surface quality. The obtained values at the end of the experiments were evaluated through the signal to noise (S/N) ratios, analysis of variance (ANOVA), 3D graphs and regression method. Through the confirmation experiments, the machining accuracy of 0.52 ?m could be significantly improved to 0.24 ?m with an enhanced performance of 53.84%. Copyright © 2015 Inderscience Enterprises Ltd.en_US
dc.identifier.doi10.1504/IJMMM.2015.071993en_US
dc.identifier.endpage232en_US
dc.identifier.issn1748-5711
dc.identifier.issue03.Apren_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage211en_US
dc.identifier.urihttps://dx.doi.org/10.1504/IJMMM.2015.071993
dc.identifier.urihttps://hdl.handle.net/20.500.12684/511
dc.identifier.volume17en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherInderscience Enterprises Ltd.en_US
dc.relation.ispartofInternational Journal of Machining and Machinability of Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAA 5083-H111; Optimisation; Surface roughness; Taguchi methoden_US
dc.titleOptimisation of cutting parameters during the face milling of AA5083-H111 with coated and uncoated inserts using Taguchi methoden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
0511.pdf
Boyut:
579.45 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu